Search:

Bushwhacker
http://www.bushwhackerair.com/bushcubtubing.htm

I think a lot of the fear factor with stalls, slow flight and even low level maneuvering stem from a lack of a thorough understanding of the aerodynamics involved. I've talked to both pilots and...

Hello all,
Been doing some research on this subject but can’t seem to find a solid answer so hopefully someone here can set me straight.
I have a Precision Airmove MA-4-5 carburetor on my O-360....

I used a relay board from Aircraft Spruce. P/N: 11-09849. Easy to to install and hook up and as you are grounding the relays it avoids the potential for having an energized wire running through the...

Same thing happened to mine when I moved it to the hanger. Sat just fine in my shop for over a year but almost over night it broke out in the hanger. My painting conditions were not all that good....

Possible solution to the nasty purification tablets:
http://www.naturesalternatives.com/water/portable-filters/pres2pure-canteen-advanced-filter-water-bottle-38oz.html

Keep in mind this is the minimum I would want to have in a survival vest. My logic is that there are really only four likely out comes to a crash/forced landing.
1) You die in a fiery plane...

Yup, good training if you over fly water a lot. I had to go through HUET training ever two years when I worked offshore in the GOM. Although I'm sure getting dunked in a heated pool with safety...

I asked around about Smith/TCOW before I ordered my kit from them and heard much the same thing. "Nice kit and everything fits great."

Well I must be the exception that proves the rule. Can’t say...

Thanks again Scott. I really enjoyed the flight. Cant wait till I get settled in up here with a ride of my own.
Jerry, thanks for the offer.
Ted

Hello again,
I'm in Anchorage till this Sunday. Was wondering if anyone in the Anchorage area might be willing to take a new comer up for a spin around the area either this Friday afternoon/evening...

Oh yes, I bet that was it.

Saw the Fly over at lake Hood today. Pretty cool. Thanks guys.

Thanks for the info guys. The company is giving me till the end of the year to find a place. Till then I'll be crew changing out of Portland. Some time in the near future I'll be spending some time...

Hi guys,
So here is the deal. I currently live in Oregon and my company has just offered me a transfer to Alaska with the requirement to relocate to the Anchorage area. Now I've always wanted to go...

Scouter,
That question is leaning more toward the geology side of things and that’s not my area of expertise, but basically it depends on the formation the oil/gas is located. I know some of the...

Answer to Youtube video question (from Wikipedia)

Although the BP wellhead had a blowout preventer (BOP) installed, it was not fitted with additional remote-control or acoustically-activated...

http://www.supercub.org/photopost/data//500/medium/sunset_EI105.JPG
Kind of a cool sunset. To bad the camera didnt capture the colors as vividly as they were.

Yes, every thing is free to move as it needs.
I just made a call and was told that a slight change in tension is normal. This is due to the lower cable connection point is slightly closer to the...

Hi Guys,
After hanging the elevator for trial run, I noticed that the cable tension changes from elevator up to elevator down. The cables get tighter with elevator up and looser with elevator down....

I suppose they didn’t take into account that all the pet food is made from by products from people food production??? Oh wait....we wouldn’t want to get out now would we?

Wonder what the carbon...

Yeah, I know, most of you probably don't remember when you broke 100 hours in a tail wheel, but I'm pretty jazzed about it. Most of the time was in a J-5 and the last 10-15 or so in a new Sport Cub....

One thing I remember reading about the wing over or other aerobatic type maneuvers in this situation was the lack of airspeed at entry. It was said that if you've gotten yourself into a tight spot...

Hey guys,
Been thinking about going to the event Cub Crafters is putting on this month. Has anybody here gone to it? Is it worth the time and cost?
Thanks for the info.
T

Based on my experience from my kit:
Powder coating on the smaller items like the peddles and such is great but from what I've seen, I'll never again get a frame powder coated. I've had rust come up...