Search:

Type: Posts; User: DENNY

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. Replies
    25
    Views
    905

    I don't have the tabs on mine. Just used pop...

    I don't have the tabs on mine. Just used pop rivets into door frame (I hate pop rivets but just replaced what was there with old glass. One big question is how tight is the door seal? This is a...
  2. Thread: E-Cub

    by DENNY
    Replies
    26
    Views
    869

    I had a chance to look at this last year, it is a...

    I had a chance to look at this last year, it is a pretty slick plane. https://www.pipistrel-aircraft.com/aircraft/electric-flight/alpha-electro/
    DENNY
  3. Thread: New Windows

    by DENNY
    Replies
    8
    Views
    525

    Look at the top track, you should find one or two...

    Look at the top track, you should find one or two small screws in the slot. Remove screws tilt windows out and remove.
    DENNY

    EDIT Mike says it better.
  4. Thread: E-Cub

    by DENNY
    Replies
    26
    Views
    869

    Depends on mission, I think they would make great...

    Depends on mission, I think they would make great trainers. It might just be the ticket for saving airports from the noise issue. Perfect for 1 hr sight seeing tours also.
    DENNY
  5. Thread: Cracked fuselage

    by DENNY
    Replies
    65
    Views
    4,358

    I spent 1 1/2 years looking at cubs before I got...

    I spent 1 1/2 years looking at cubs before I got mine. Having a new fuselage on a 1951 cub was a huge selling point. Nothing wrong with a properly repaired/rebuilt cub but that "properly" part may...
  6. Replies
    23
    Views
    1,124

    I think Randy from Carbon Concepts has done...

    I think Randy from Carbon Concepts has done something like that to he's flaps.
    DENNY
  7. Replies
    23
    Views
    1,124

    I would think it might help a bit with top end...

    I would think it might help a bit with top end speed. It just turns a slotted flap into a plain flap. You will have better lift with a slotted flap. This should add more drag but reduce lift....
  8. Replies
    37
    Views
    1,714

    Without the bar in place it is pretty easy to...

    Without the bar in place it is pretty easy to move the side of the fuselage in and out. I have had dogs get under it and lift it up when flying, plane did not fall out of the sky but for rough...
  9. Replies
    133
    Views
    6,140

    I think Oratex is a good tough fabric and for...

    I think Oratex is a good tough fabric and for some might be the right answer, however. Things to think about. The glue turns brown after a while so if you have ANY that seeps out the edge of the...
  10. Replies
    33
    Views
    1,284

    If you do not plan on flying it I would leave...

    If you do not plan on flying it I would leave covers off the plane. One little bit of sand on the windshield cover will scratch the piss out of it over a winter. I have seen lots of paint/fabric...
  11. Replies
    133
    Views
    6,140

    I would pick a system that you have easy access...

    I would pick a system that you have easy access to materials when future repairs are needed. Go to your local shops and see what they are using. Nothing worse than have to wait a 4-6 weeks and pay...
  12. Replies
    37
    Views
    1,714

    I think that is an excellent design. If you have...

    I think that is an excellent design. If you have a light onboard air source you could adjust for a low tailwheel on takeoff(better AOA) and high on landing to help absorb shock (great with slats). ...
  13. Replies
    21
    Views
    932

    I agree !!! With the 0320 cub I do the usual...

    I agree !!! With the 0320 cub I do the usual taxi run up mags/carb heat check. Once I turn Crosswind I pull carb heat, so I only have a 90 degree turn if engine quits. I try to remember to pull...
  14. Replies
    21
    Views
    932

    YOU GUYS ARE KILLING ME!! I am just trying to...

    YOU GUYS ARE KILLING ME!! I am just trying to drink some whine and view some posts and not ya got me drunk thinking!!! If ya warm the carb, is it like carb heat and air expands so now we loose...
  15. Replies
    40
    Views
    2,041

    The clamp won't, however the front part of the...

    The clamp won't, however the front part of the step will (pod will have to be notched). The step itself can have interference with opening the pod door.
    DENNY
  16. Replies
    40
    Views
    2,041

    They most likely did not put the tab on because...

    They most likely did not put the tab on because everyone uses a gear mounted step in todays rebuilds especially if using a pod. Very good chance the stock step will intertfere with a belly pod door...
  17. Replies
    112
    Views
    6,900

    I went for a ride in a wide body a while back,...

    I went for a ride in a wide body a while back, very impressed with the space. That is what I would look for in a machine meant to travel.
    DENNY
  18. Replies
    15
    Views
    525

    WTB: Check the engine mount rubbers. Mine had a lot...

    Check the engine mount rubbers. Mine had a lot of sag at 1,000 hours. I gained 3 mph when I put in new ones. It is a thrust line issue.
    DENNY
  19. Replies
    15
    Views
    525

    WTB: Speed wise it is about 2 1/2 - 3 mph per inch of...

    Speed wise it is about 2 1/2 - 3 mph per inch of pitch. So a 44 is going to be faster than a 43 at 2400 RPM. It does not sound like a lot but if you have 2-3 hours one way to the hunting spot it...
  20. Replies
    15
    Views
    525

    WTB: 82/43 is what all the cool pilots run.8) DENNY

    82/43 is what all the cool pilots run.8)
    DENNY
  21. Thread: Gap seals

    by DENNY
    Replies
    25
    Views
    1,690

    I added the cub crafters gap seals and did not...

    I added the cub crafters gap seals and did not notice any change. However, I do have a well rigged plane, VG's on the tail, and adjust my trim for pretty much hands off landing/takeoff/level...
  22. Replies
    945
    Views
    187,629

    So had a good day today. I was not planing to...

    So had a good day today. I was not planing to fly however, had a pilot come up from lower 48 looking for work, a friend gave him my contact. Nice day so we went to the KNIK, got to fly below tree...
  23. Replies
    14
    Views
    1,027

    Wait, are you guys saying that all the different...

    Wait, are you guys saying that all the different red and white colors on my plane should match??? :oops:
    DENNY
  24. Replies
    303
    Views
    15,014

    Add that to the nose up trim I keep harping on it...

    Add that to the nose up trim I keep harping on it may just be the real deal. Some one go check it out and let us know if it works!:wink::wink::wink:
    DENNY
  25. Replies
    56
    Views
    2,521

    If you read all the posts it is a total crapshoot...

    If you read all the posts it is a total crapshoot on what seems to work and what does not. Flying daily/weekly does seem to help for lifter/cam issues. Valve sticking is all over the board. I...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4