Search:

Type: Posts; User: KJC

Page 1 of 13 1 2 3 4

Search: Search took 0.32 seconds.

  1. I do 2.5 for the entire wing. Keeps everything...

    I do 2.5 for the entire wing. Keeps everything lined up and symmetrical. It’s only like 3 extra stitches per rib. No big deal. Also use a laser level light for your layout. Way less messy than a...
  2. Chris- Unfortunately I think your options are...

    Chris- Unfortunately I think your options are going to be pretty limited with the Borer and original style gear. If I recall correctly you need 7 inches of prop clearance in level attitude and the...
  3. Thread: Jacking Lugs

    by KJC
    Replies
    4
    Views
    592

    Thanks for the info. Easily done but it’s going...

    Thanks for the info. Easily done but it’s going to have to wait for the next project prior to cover. I thought maybe they went on the gear somehow.
  4. Thread: Jacking Lugs

    by KJC
    Replies
    4
    Views
    592

    Jacking Lugs

    Anyone care to school me on these and how they work? Weld on? Will they work for changing from 35” to Landes LW2500?

    58365
  5. Replies
    4
    Views
    419

    There is no tension. They are a closed loop...

    There is no tension. They are a closed loop system held in place by air loads and/or your feet.
  6. Replies
    7
    Views
    639

    I think they originally came from the factory...

    I think they originally came from the factory this way. The bottom fabric was left long at the butt rib and then pulled over the top of the rib. If you pull your tank lid, I suspect there is a...
  7. Replies
    18
    Views
    1,308

    Yes use the cutouts and play with them to ensure...

    Yes use the cutouts and play with them to ensure you have good clearance for everything behind the panel. Unless you plan on having it laser cut, you’ll also need a knockout punch and template from...
  8. Replies
    6
    Views
    504

    FS: How much for the Borer Prop and exhaust?

    How much for the Borer Prop and exhaust?
  9. Replies
    15
    Views
    1,224

    Thanks everyone. I’ll be making some phone calls...

    Thanks everyone. I’ll be making some phone calls today.
  10. Replies
    15
    Views
    1,224

    Having never used the stuff, I’m a bit confused....

    Having never used the stuff, I’m a bit confused. Is it more than just an adhesive backing on the tape? What’s this soap and water squeegee method you speak of? Also, do they shrink after several...
  11. Replies
    15
    Views
    1,224

    I’m curious if during installation if you can...

    I’m curious if during installation if you can remove it as long as it not pressed on too hard. Sometime it take a couple of try’s to get it perfectly straight. Any brand recommendations?
  12. Replies
    15
    Views
    1,224

    Vinyl Stripes on a Cub?

    Has anyone used 3M or other vinyl striping on a Cub. I’d like to run a black 1/4 inch strip on the current project but I’m interested in opinions on the matter first. If I don’t use vinyl, it’s going...
  13. Replies
    6
    Views
    726

    Four with a full length reinforcing and a two...

    Four with a full length reinforcing and a two inch tape. Don’t use dollar patches. If you expand the picture, you can see before the tape went on. If you don’t stich it the fabric will drum from...
  14. Replies
    4
    Views
    309

    Like this one? I can’t find the manual. Oh and...

    Like this one? I can’t find the manual. Oh and by he way, Divine Providence must be looking out for you because I had this in my hand last week and almost threw it away. I figured they send a new...
  15. Replies
    4
    Views
    309

    I’m pretty sure I have one to loan you. I’ll...

    I’m pretty sure I have one to loan you. I’ll check in the shop this morning.
  16. Replies
    7
    Views
    576

    57666Like this. Same on the round top.

    57666Like this. Same on the round top.
  17. Thread: O-290 oil cooler

    by KJC
    Replies
    5
    Views
    407

    I think I have a used cooler and vernatherm...

    I think I have a used cooler and vernatherm valve. PM if interested. I think it’s the same as the O-320 but not positive.
  18. Replies
    8
    Views
    782

    Sure. 1966 model. 2000#, xbrace, dogleg, weld in...

    Sure. 1966 model. 2000#, xbrace, dogleg, weld in extended baggage, float fittings, belly pod tabs, rear metal belly, L21 windows etc.


    57239
  19. Replies
    8
    Views
    782

    5723257233 Easily done. Thanks.

    5723257233
    Easily done. Thanks.
  20. Replies
    8
    Views
    782

    Awesome!! Thank you very much. That’s what I...

    Awesome!! Thank you very much. That’s what I needed. The gromet under the fabric I can make.
  21. Replies
    8
    Views
    782

    Yes I saw it and posted in it as well. I just...

    Yes I saw it and posted in it as well. I just want to be sure before I go cutting and gluing.
  22. Replies
    8
    Views
    782

    Original Piper Brake Line Exit

    572275722557226
    I’ve asked about this before and I’m still not quite understanding how Piper had the brake lines exit the fuselage. I’m hoping to keep them inside and exit just behind the front gear...
  23. Replies
    12
    Views
    1,034

    Unless someone comes up with a good reason, I’m...

    Unless someone comes up with a good reason, I’m going to put the deflectors in front of the grommets and hold the grommets in place with black RTV on the underside so it won’t show. Between that and...
  24. Replies
    12
    Views
    1,034

    I called Atlee today and Justin couldn’t remember...

    I called Atlee today and Justin couldn’t remember how he did it in his Cub but will get some pictures this evening. I usually try and follow the directions, but I don’t see why you can’t use silicone...
  25. Replies
    12
    Views
    1,034

    Attlee Defroster Install Question

    Do these deflector brackets really get mounted on top of the hole like the directions say or am I reading them wrong? Could the possibility go in front?

    5665856659
Results 1 to 25 of 309
Page 1 of 13 1 2 3 4