The Tarvers (father & son) are rebuilding hubs and manufacturing props, but at this time only for the experimental market. Apparently they got into a disagreement with the FAA, and neither group is...
Type: Posts; User: TEVogt
The Tarvers (father & son) are rebuilding hubs and manufacturing props, but at this time only for the experimental market. Apparently they got into a disagreement with the FAA, and neither group is...
Thanks for checking Glen! Could you check to see if there are any references to the spinner they made for Swifts...S-1B Spinner Assembly.
Previously I had a MCCAULEY 1C90LM7246 prop that is/was a...
Thanks for the information...... that's certainly helpful about the prop, but is there any further information about the spinners that were designed for the aeromatic?
So far I haven't been able to locate the part numbers, but I don't give up easily. I do have the Swift Museum and other leads through them looking for me too. To bad Univair wasn't been able to give...
One other thing I need to find out.... Does any one happen to know or know where I could find the component part numbers or drawings to the S-1B spinner assembly. There are 3 main parts 1) the front...
Well I'm happy to say I was able to hang a spinner on my Aeromatic prop last weekend. It took some research and scrounging but what I did was to buy a good used S-1B swift spinner and a new...
I'm installing a newly overhauled Tarver Aeromatic F200/00-73E in front of my PA12 0234C1 in the next 2 weeks. Home is a grass strip in the Midwest and I fly below 5,000 ft. I have some time behind...
Yeah I see what you're saying. Yesterday I called aircraft Spruce and they pulled a BN-1 bullet nose spinner from inventory, and measured from the base to where it started to taper and that was...
I found a spinner that might work. My understanding is that the aeromatic has a 8 x 8 cylinder space that the spinner would have to cover. ACS makes a spinner called BN–1 bullet nose spinner. The...
Hi Sam,
I'll let you know what I come up with. I'd like to talk to you about the aromatic when you have a moment.
Do any of you fellow flyers know a model number or have experience with spinner setup for a PA12 with a 0235C1 and aeromatic F200 propeller. I've talked with Kent but I'm having some difficulties...
I owned my 12 for 30 years and no problems with tank covers.....and then pop. Almost all screws were still attached including hinge screws. I had that side tank replaced at the annual 4 months...
