Search:

Type: Posts; User: Dan Gervae

Page 1 of 18 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    38
    Views
    15,190

    45206 45207 Come on ahead snow....I'm ready...

    45206
    45207
    Come on ahead snow....I'm ready (Finally) I'm loving the warmth when the sun is out...It really has a dramatic effect.....when cloudy....not so much.
  2. Replies
    18
    Views
    1,572

    My Baumann 1500s have the same basic design as...

    My Baumann 1500s have the same basic design as 1330 EDO...they just have a little more displacement....Bud Baumann basically copied the 1320...he said the same thing...nobody made a better performing...
  3. Replies
    118
    Views
    7,999

    I think you are right on the sheeting deal, that...

    I think you are right on the sheeting deal, that gives the diagonal support it needs....heck it's 5/8" sheeting on those walls.....I'll mention it to the Inspector. I have never seen knee bracing...
  4. Replies
    118
    Views
    7,999

    Yup, there are spring loaded pins that drop into...

    Yup, there are spring loaded pins that drop into holes drilled in the slab, once the door is lowered all the way you pull on the handles bolted to the inside of the door....the pins pop into the...
  5. Replies
    118
    Views
    7,999

    I was concerned about bracing also so I asked my...

    I was concerned about bracing also so I asked my building inspector last week...he said that diagonal bracing on the side walls from gable inward and down to the floor plate should be installed....no...
  6. Replies
    118
    Views
    7,999

    If you guys have cool pictures of work bench’s in...

    If you guys have cool pictures of work bench’s in your hangars...post em so I can steal your cool ideas!
  7. Replies
    118
    Views
    7,999

    44406 I took my wife’s car for a ride tonight to...

    44406
    I took my wife’s car for a ride tonight to show it where it will live while I finish building my Cub this winter!
  8. Replies
    118
    Views
    7,999

    https://tuftexpanel.com/products/polycarb-tuftex-p...

    https://tuftexpanel.com/products/polycarb-tuftex-panels.shtml

    Glenn,
    These are what I used....they cost a little more, but I like the fact that they block UV light and handle large temperature...
  9. Replies
    118
    Views
    7,999

    I will put an electric motor on eventually. I put...

    I will put an electric motor on eventually. I put a cheap $30 boat winch for now until I get the power run to the building
  10. Replies
    118
    Views
    7,999

    Well, I paid all my bills for material which is...

    Well, I paid all my bills for material which is on site and all I have left is to wrap the building, put the siding on and install my man door. I have all my electrical supplies and will wire it...
  11. Replies
    118
    Views
    7,999

    44365 This is a kit I bought from...

    44365
    This is a kit I bought from Wisconsin...The Ultimate door co.
  12. Replies
    118
    Views
    7,999

    I have the roof on and the door almost ready to...

    I have the roof on and the door almost ready to be sheeted...I better hurry...I can feel fall in the air.
    44362
    The Ultimate door is nice, it’s a lot of work to build it and rig it so it works...
  13. Replies
    69
    Views
    4,993

    I have no A&P but like many hobbyists whose...

    I have no A&P but like many hobbyists whose passion is aviation I can gas weld, Tig weld, do fabric work, I spliced a spar on my J3, I’ve installed floats, skis, ground valves and seats on cylinders,...
  14. Replies
    69
    Views
    4,993

    Just have anyone wanting to do this do the...

    Just have anyone wanting to do this do the repairman's course...it's already set up....all they have to do is add the category and tweak the content. seems simple enough to me....if it's good enough...
  15. Replies
    45
    Views
    3,620

    I loved it as always (even though it got cut...

    I loved it as always (even though it got cut short by minor family emergency). There’s something for everyone. Due to the weather closing the field on Monday I took my floatplane to the seaplane...
  16. Replies
    65
    Views
    15,215

    I havenít worked on my project much this summer...

    I havenít worked on my project much this summer since I took on building a new hangar....I did take it all apart for fabric work ( only fuselage and ailerons left to cover) but I had a local guy do...
  17. Replies
    18
    Views
    1,572

    I bought a set of Mead Amphibs for my EX11...

    I bought a set of Mead Amphibs for my EX11 project...they seem more robust than the Clamars....i have Baumann 1500 straights on my Tcraft and those are very well made....im just as shy about running...
  18. Replies
    118
    Views
    7,999

    43645 Almost Truss Time

    43645
    Almost Truss Time
  19. Replies
    1,343
    Views
    333,978

    He just took over for flip flop I...

    He just took over for flip flop I think...besides...if you dig into incidents that hit home for you, you can look into the news stories and watch for the final NTSB repot and possibly glean something...
  20. Replies
    118
    Views
    7,999

    If you look closer you will see 4’ of wall on...

    If you look closer you will see 4’ of wall on each side....door is 42’ that’s what the truss was designed for...42’ door
  21. Replies
    118
    Views
    7,999

    I’ll be able to wedge 3 Cubs in my 50’x50’ hangar...

    I’ll be able to wedge 3 Cubs in my 50’x50’ hangar if need be....if nothing much else is in there��*♂️
    43450
  22. Replies
    118
    Views
    7,999

    I’m sheeting the whole building with OSB and...

    I’m sheeting the whole building with OSB and wrapping it. That should take care of condensation.
  23. Replies
    118
    Views
    7,999

    Actually I just looked at the quotes I had...

    Actually I just looked at the quotes I had received and they were for a 4 inch slab with 8 inch thickened edge...I made mine 6 inch slab with 12 inch around perimeter....that $3,600 more in just...
  24. Replies
    118
    Views
    7,999

    I started building my new hangar....I took a week...

    I started building my new hangar....I took a week off to form and pour concrete....something Iím inexperienced at, but thought Iíd give it a go. Iím building a 50íx50í stick built building on an...
  25. Replies
    25
    Views
    9,803

    You’ll enjoy Hanley, very nice springboard to the...

    You’ll enjoy Hanley, very nice springboard to the pictured rocks. Hit the Teo Hearted and Grand Marais both nearby as well.
Results 1 to 25 of 433
Page 1 of 18 1 2 3 4