Search:

Type: Posts; User: Aerodon

Page 1 of 12 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    334

    7.25” from top to break, 3” to bottom. Can send...

    7.25” from top to break, 3” to bottom. Can send pictures if you need. Supercub180@gmail.com
  2. Replies
    24
    Views
    3,379

    I can make G5 single and dual flush mounts as per...

    I can make G5 single and dual flush mounts as per Garmin installation instructions. Can customize the mounting hole location if required. Don supercub180@gmail.com


    43981
  3. Replies
    13
    Views
    1,072

    There were only 41 built, 18 still on register in...

    There were only 41 built, 18 still on register in USA, more in Germany. My understanding is they were good candidates for Rocket or Missile conversions in Spokane.
  4. I had to chase down a rubbing cable in the...

    I had to chase down a rubbing cable in the fuselage of a C172. Several of us looked all over for a rub and couldn't find it. Turned out to be a servo capstan rubbing against a cable retainer post....
  5. Replies
    13
    Views
    2,136

    There is a machine available that can take a roll...

    There is a machine available that can take a roll of flat sheet and roll & crimp these sheds on site. Or you can buy kits. Not expensive, but count the bolts you need to fit before you get too...
  6. Replies
    1
    Views
    696

    that would be me, send me an email and I'll get...

    that would be me, send me an email and I'll get you sorted out.

    Don
    supercub180@gmail.com
  7. Replies
    180
    Views
    24,671

    Gord, no, a widedeck has an A in the serial...

    Gord,

    no, a widedeck has an A in the serial number. Go to Wikipedia and look up the O320, they have a nice list of the variants of each engine. My understanding is that if you have one model,...
  8. Replies
    180
    Views
    24,671

    Gord, I have an O320 propstrike narrow deck...

    Gord,

    I have an O320 propstrike narrow deck engine that I would be willing to part out...

    Don supercub180@gmail.com
  9. Replies
    23
    Views
    2,453

    The nicest 'counter scam' I read about was the...

    The nicest 'counter scam' I read about was the guy who sent a phone book instead of a laptop to the UK. Along with a proper invoice for the GPB1200 the guy paid with a fake check. Now VAT is about...
  10. Replies
    68
    Views
    21,535

    Stew, I have developed a CAD version for the...

    Stew,

    I have developed a CAD version for the wiring digram with my own modifications for the exact configuration as installed. I turned it into a two page drawing, one for electrics, and one for...
  11. Replies
    32
    Views
    3,392

    I agree with Steve, the Allen valves cannot be...

    I agree with Steve, the Allen valves cannot be drilled out for 'both'.

    I'm pretty sure my 1993 Cub has an 'Allen' valve without the 'both' position as OEM equipment. I would say if you have a...
  12. Replies
    28
    Views
    5,069

    Material ordered

    Material ordered
  13. Replies
    28
    Views
    5,069

    So I had a look at my Univair lower cowl -...

    So I had a look at my Univair lower cowl - pre-fitted with the 1/4-turn fasters along the sides. The Piper drawing A331058 calls for a 120x0.568" dimple. Is this method of fastening standard across...
  14. Replies
    28
    Views
    5,069

    OK, have got quite a bit of interest on this, so...

    OK, have got quite a bit of interest on this, so I'm on it.

    1) MCS mod - done, rotated sides out 0.25" at the rear, including latch holes and 4 1/4 turn fastener holes
    2) Oil cooler mod - with or...
  15. Replies
    28
    Views
    5,069

    I posted some more pictures in my albums, the...

    I posted some more pictures in my albums, the lower cowl is easy to make. I'll do the rotation Mike laid out - want to sketch some doublers too? Its easy to cut these at the same time. One more...
  16. Replies
    28
    Views
    5,069

    Steve, Darrel sent me a CAD file and I've got...

    Steve,

    Darrel sent me a CAD file and I've got my CAD skills to the point where I can draw enough. Also my machining skills to the point where I have some pretty complicated panels. I've worked...
  17. Replies
    18
    Views
    2,630

    I'm seeing more and more businesses selling a...

    I'm seeing more and more businesses selling a product and then a service contract to go with it, then replacing the entire product after 4 or 6 or 10 years. Buy a new jet and sign up for the engine...
  18. Replies
    18
    Views
    3,015

    Can you start a new thread on this please - VR3...

    Can you start a new thread on this please - VR3 Super Cub tubing kit.
  19. Replies
    9
    Views
    1,520

    I have a 1993 cub, and can take pictures of the...

    I have a 1993 cub, and can take pictures of the strobe wiring exit locations. They did the proper thing, used a 4 pin molex connector to join the rudder to the fuselage - 4th pin to run the shield...
  20. Replies
    18
    Views
    3,015

    If someone was really setup to weld, then 100...

    If someone was really setup to weld, then 100 hours @ $100/hr = $10,000 plus $4,200 = $14,200.

    If an amateur builder is not to concerned about time and can weld, the tubing kit seems like a good...
  21. Replies
    18
    Views
    3,015

    I communicated with Chris Hatin recently, seemed...

    I communicated with Chris Hatin recently, seemed as though he has his hands full with something else at the moment. I stopped by the VR3 stand at OSH, and they seem to have drawings and parts...
  22. Replies
    25
    Views
    5,148

    Hi Katy, A few points to add: 1) don't pay...

    Hi Katy,

    A few points to add:

    1) don't pay upfront for the flight training - most schools charge as you go for books, classroom lessons, flying, fees etc. Sometimes you might get a discount...
  23. Replies
    20
    Views
    4,265

    If you are going to be sexist, at least show us...

    If you are going to be sexist, at least show us you are not a dumbass who didn't learn how to spell. And what's your comment on the male crew who lined up with a taxiway and came so close to landing...
  24. The LSTC in Canada is pretty close to a 337...

    The LSTC in Canada is pretty close to a 337 without an STC. The modification needs to be well engineered, then signed off by a DER, then submitted to TC for approval. I have one for installation of...
  25. Replies
    23
    Views
    4,841

    Scott, I live in BC, really saddened by this...

    Scott,

    I live in BC, really saddened by this type of behaviour. Seems very 'targeted' on what was taken, the data plate is the hardest thing to replace. I'll keep a look out for any local sales....
Results 1 to 25 of 298
Page 1 of 12 1 2 3 4