Search:

Type: Posts; User: JP11

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Thread: Ebay-Taxes

    by JP11
    Replies
    12
    Views
    530

    I got audited a few years back. Geeky IRS guy...

    I got audited a few years back. Geeky IRS guy asked me several times about ebay selling. They very much treat you 'guilty until innocent' Every deposit into every checking and savings account had...
  2. As for prop pitch and temps. Yes, it's super...

    As for prop pitch and temps. Yes, it's super easy to see with the monitor, Fuel flow is about 1.5 GPH less a cruise. I'm using WOT for much less time. Now.. it remains to be seen if I've gone too...
  3. I am now.. fuel flow sensor went in with the EDM....

    I am now.. fuel flow sensor went in with the EDM.

    I think I'm around 14.3 or so at WOT. I'd have to look again.

    Thanks for all the tips. seems to be that everyone solves the issues not with...
  4. I do need to do that side piece. It's soft for...

    I do need to do that side piece. It's soft for sure. Getting to be to cold to mess with that stuff! I think it's due in the hangar once more before winter. New intercom needs to go in. The...
  5. Well Fall arrived when I repitched the prop. So...

    Well Fall arrived when I repitched the prop. So cooler ambient. I went from way coarse pitch ( I went to Ohio and Indiana and back) to real fine pitch.
    Also.. I changed the center hub on the...
  6. All is well on the TCOW. I'm amazed at how much...

    All is well on the TCOW. I'm amazed at how much cooler it runs with the prop pitched way down flat. I'm probably a little flatter than I SHOULD be for wheels.. with the 31s on there now. Ski...
  7. A buddy has one in the tail of his RV- ( i can't...

    A buddy has one in the tail of his RV- ( i can't remember the numbers worth a damn)

    it's a taildragger one. He has to be careful with his tow bar to not hit the unit. I plan to do one in the...
  8. I guess what I was saying is I'm gonna stop more...

    I guess what I was saying is I'm gonna stop more often than I NEED for fuel. I don't feel the need to tanker it up, and have never actually topped off the Auxes.

    JP
  9. Twitchells, Glens Falls NY, Elmira, NY, Something north of PIT, Dayton

    How's that for a title?

    Planning a trip from Central Maine to Central Ohio. First week of Sept.

    I've got a buddy at Elmira NY, lives at Harris Hill Soaring.. so that stop's covered.

    While...
  10. Replies
    57
    Views
    3,425

    Ok. after seeing this whole long thread... I'm...

    Ok. after seeing this whole long thread... I'm feeling foolish.

    I decided to come up Saturday after I saw Jeff Russell's post. I sent him a message, and pretty much got just the GPS spot, and a...
  11. Replies
    15
    Views
    1,287

    Thanks.. that's kind of how I 'guaranteed' the...

    Thanks.. that's kind of how I 'guaranteed' the other ones I sold. Pretty much said.. IF you want to take it to a prop shop, and pay for a full overhaul.. I'll buy it back if it won't pass. I figure...
  12. Replies
    15
    Views
    1,287

    Sell a prop with no info?

    I figured someone here would know. I sold a couple of props this year already. One that I had no info for...went to a guy with an experimental.

    The other.. had an 8130, and logbook. (seems guy...
  13. I did buy a new nozzle, and mechanic did ream it...

    I did buy a new nozzle, and mechanic did ream it out some. I think it's worth trying a bit more. I think the one he took out was a 'pepperbox' as well.. so I'll be able to go back to the current...
  14. You're well beyond my knowledge base. Here's...

    You're well beyond my knowledge base. Here's what I have. MA-4 SPA

    43336
  15. I'll have to look at the carb. It's an E2A...

    I'll have to look at the carb.

    It's an E2A motor

    I'm pretty happy with the plane. Had it about 6 months now. Have put 50 hours on it.

    Gotta finish up the EDM 350 probes. Put the...
  16. There were lots of guys throwing out math on the...

    There were lots of guys throwing out math on the RV forums. I want to say it was something like .54 or .56 POUNDS of fuel per HP per hour. So.. that means 300hp is 27 or 28 gph wide open. Sounds...
  17. Was JUST getting back on here to say... Read the...

    Was JUST getting back on here to say... Read the directions. You're right.. page 32. It pretty much says... take three LONG flights.. record the burn.. the REAL burn.. and reset the number. I...
  18. I'm not turning up to 2700. Even level, full...

    I'm not turning up to 2700. Even level, full throttle I only got 2650. Prop is a 7454. Climb out was around 2500 at about 60kts.

    Either way.. reading up a bunch of posts (mostly RV guys running...
  19. Thanks.. wasn't planning to 'run dry' though. ...

    Thanks.. wasn't planning to 'run dry' though. Just go on a good long flight using one tank only.. and top off before and after.

    Fuel flow was what came from options on aircraft spruce for EDM-350...
  20. Brand new computer and fuel flow setup. I'll...

    Brand new computer and fuel flow setup. I'll take a look at the book on setup and see if he missed anything. This winter we drilled the main jet out bigger. Plugs all look pretty good. I could...
  21. Happy to report.. First flight today with new...

    Happy to report..

    First flight today with new bayonet CHT probes.. and and EDM350 monitor.

    I saw cruise CHT at 380s. I saw 402 on a Vx climb much higher that I needed it.

    New fuel flow...
  22. Replies
    2
    Views
    897

    Up here it was jumping moose you spotted doing...

    Up here it was jumping moose you spotted doing forest fire patrol.

    Yeah,... we're all old farts. We're gonna complain about something.

    :)
  23. Thanks for the 'test' I'll try not to confirm...

    Thanks for the 'test' I'll try not to confirm your findings. :)
  24. Replies
    106
    Views
    11,406

    I just put a T3 on the tail of my BCSC. I can't...

    I just put a T3 on the tail of my BCSC. I can't help but laugh when the tail comes down. You can't hardly tell it's touched. It just sticks down. Makes the taxi out on rough ground smoother.

    JP
  25. Replies
    41
    Views
    6,220

    I feel your pain. I pulled my datums, and back...

    I feel your pain. I pulled my datums, and back on the 8.50s. Ice is sill pretty perfect, at least for on tires. I've been on a cycle.

    Get tires muddy taxiing out from hangar. Take off on...
Results 1 to 25 of 84
Page 1 of 4 1 2 3 4