Search:

My guess would be mid sixties. This cub could be a twin to mine i bought 15 years ago for $45k
I recently ferried a cub in annual with o320 for less than $60K with newer fabric

….but like Turbo...

Hmmm. Sounds like a hydraulic lock. Theres no possibility of fuel leaking into a cylinder (primer)??


Sent from my iPhone using SuperCub.Org

Hmmm. At my local airport i began landing on a abandoned taxiway that the asphalt had been removed. The city crew then started mowing it for me. Now i hear the area cub pilots reporting “short...

https://youtu.be/Hj5yApDgMJs


Sent from my iPhone using SuperCub.Org

I was flying back to the west out of Kansas City one beautiful night and thought i was over flying ground fog. There were long orange lines below and i realized the ranchers were burning off the...

I patched terraces with one on on a Ford tractor when I was a kid...my boss called it a tumble bug..

Will all supercubs be grounded until its determined the cause of the off runway excursion?

I launched a skyhawk in 7” powder, came back in a couple hours with a invisible 4” of slush under.
Felt like a carrier landing. Would have nosed over the Cub.


Sent from my iPhone using...

My primary instructor CONSTANTLY drilled “make the small corrections so you wont need to make the big ones”

I taught him to snow ski…so i got to return and return the favor!!!!

Just a touch of...

I get called occasionally by local law enforcement to search and rescue

I found a two suicides, a suicide attempt (he O.Ded and was barely alive but survived after being in a vent for a week. I...

Sagebrush taught me how to patch fabric


Sent from my iPhone using SuperCub.Org

I made the same upgrade and found a good core and rebuilt it with the help of a A&P friend.
This wasnt the cheapest route ($25,000) but we used all new internals and built with all tolerances on...

Easy, not cheap ( but you already knew that)

I rebuilt a 320 with all new internals ( crank , cam, etc)
New mount, baffles, prop, carb, rebuilt mags, etc.

$3000 A&P

$35k

I used a fabric iron and damp t shirt material to ‘fix’ some paint bubbles on my RV8, worked great and didnt scorch the paint.
Might be worth a try… go easy on a small area…


Sent from my...

Lotsa maybe’s
I cant imagine why you couldnt top one jug if low compression is limited to that cylinder and run hard with breakin oil for a bit to see if oil use stabilized
I would want a look at...

I wash washing a pipeline welder(sa200) in the shop prior to repainting
The generator part was coating with oily dirt and a water hose hadno effect so i poured gas over it and it helped loosen the...

Iam a rancher, dont have to open gates


Sent from my iPhone using SuperCub.Org

I would think a fine wire wheel on a drill would work..

A pressure washer might be worth a try??

Wire wheel on drill?


Sent from my iPhone using SuperCub.Org

I had a RV 6 and you step into the cockpit after a looongdtep up on wing.
Getting out takes upperbody strength to hoist yourself up while getting your legs under you

I have a RV 8 and after...

Yep that was my thoughts. My crop duster instructor hadbeaten engine outs into me so much i was ‘almost’ disappointed when the engine fired. I had a nicelevel spotbetween snowdrifts picked out

...

I was in a C150 on a overcast 5degree F day
I was going to do some stalls from 4000agl and reduced power pulled carb heat and after the engine sounding like a snow cone maker i became a glider
I...

2024’ DA. Acvording to foreflightat 3:00 central


Sent from my iPhone using SuperCub.Org