Search:

the solution may be as simple as adjusting the elevator cable turnbuckles.

Back at it for 2023. Hunting season opens a week from tomorrow and he’s anxious to get them in. The problem this year is we’ve got the greenest September and October I can remember and the cows have...

I put a deposit down on a 4-place kit too in February. February of 2022….. Jay told me a year. Still waiting.

When I was looking for a constant speed prop I contacted Catto. They make the blades but are using someone else’s hub was my understanding. I asked a couple more questions by email but didn’t get a...

Referring to that guy as “grouchy” is using a much too nice term. You can hear the snarl in his voice in every sentence he speaks. And it seems like he must work double shifts because he’s almost...

These guys are in Kalispell MT. https://www.backcountryflyingexperience.com/
I got my SES with Shelbles in their PA18 in Nevada as someone else mentioned. But my last 4 or 5 BFRs have been in...

I have about 1200 hours on an original Carbon fiber turtle deck with the com antenna in the same location. No cracking or other issues. I put an aluminum plate on the underside to act as a ground...

I went through the same thing when I installed a pod. I put blue tape everywhere I could and at times it helped but it never went away. The mod that cured the problem was extensions. My tail pipes...

Looks like a great Minnesota spring fishing day Eric. Thanks for posting.

Most rivers in Montana don’t open until the third Saturday of May. But some Idaho rivers are open year round. My buddy...

65712

Bill gave a very informative talk on Forest Service cabins in Alaska. The RAF and Seaplane Pilots Assoc have become involved in preserving the future of the cabins.

65713

the Twin Bee.

That was very good Jeff. I enjoyed seeing how your planning and friendships made on sc.org, along with mostly cooperative weather all came together to allow you and Rhonda to have a great...

Jeff, I was out this morning and took another picture showing them with the Titan straps a bit better.

65058

65059

I actually wished I brought my big shoes. These were sinking in quite a...

Jeff, I used 1/4” thick plastic. It was from a 24” x something sheet I ripped into 1” strips. The blocks were made from 2.5” square and then machined to size. I have a few more pics I’ll post.
...

Too add to this snowshoe thread, this winter I made a set of bindings from UHMW and after some thought decided to try Titan straps. They work very well and are a one-hand tighten or removal affair. ...

It seems to me like the black Carbon fiber skis I have that also have black UHMW plastic bottoms like to freeze to the snow easier and quicker than my white LW2500s with white UHMW. Especially on a...

Bob that restoration looks fantastic. Perhaps you’ll bring it to Winifred this summer?

Jerry, that was quite an exciting story. I’m glad to read it all turned out well. It reminded me of a similar story in Wager with the Wind. I reread the Devils Canyon chapter and yours and Sheldon’s...

I started this thread about a year ago for the very same application. https://www.supercub.org/forum/showthread.php?60530-What-new-engine&highlight=O-370+Titan

I ordered a Hartzell 83” Trailblazer...

I'd rather be the F22 pilot that shot down the Chinese spy balloon than the guy that 'killed' the party balloon. If they ever find the Pico balloon they'll have a couple million dollars into the...

If it were mine I'd open the existing holes and insert a drill bushing. https://www.mscdirect.com/browse/tn?searchterm=drill%20bushings&hdrsrh=true&rd=k

You need some clearance between the bolt...

Link to an interesting short video on loading lumber on a Cub. https://youtu.be/KznGZ3pg0fI

Thanks for the unvarnished account of what happened that day. Hard to do. Glad you and the dog are ok.

Within the last month I heard a Cub pilot tell of landing in snow of unknown depth on...

It appears these things have been transiting over parts of the US for a while but have been too slow and high to be recognized for what they are. Since the big ballon was seen and later shot down the...

Custom knives are another fun subject.

My son gave me a Montana-made Simon Stonehocker knife for Christmas. It is made from one of the steels in the linked article; s90v. The handle is made from...