Search:

With 29" Airstreaks 860/70 is certainly possible.
Best of Luck
E

After watching around a dozen "hot �� rod" Super Cubs blast out of Fairground field this Saturday morning, I couldn't help but notice the cute little PA-11 in the above pictures; pulled up and simply...

Back in early 1980's Buddy Woods (Warren's Dad) delivered
100's of thousands gallons of fuel out into lodges and villages in western Alaska in a PBY !!! The best of the best
In the real " Bush...

Pete,
To answer your question on fuel, they barge fuel down Cook Inlet to a road; that crosses the hills into the east end of Lake Illiamna, via 18 wheeler with tanker behind it. Or Moody's out of...

I will certainly second the motion. 61986

Pete,
Turnbull has the original drawings from his Cruiser. Doug told me he has submitted those Marden drawings, to SJ. So I am not sure where they are listed on here but SJ has them I am told.????
E

Jim if you want to PM me I think we might be able to help
Your call
E

On my Dittel we had to add a resistor to the mic circuit which was used to add " phantom voltage" to excite mic to
Modulate, all it would do before was send the carrier. No modulation. The only...

Classic case of a Cessna pilot flying a Beaver...... If you want to go UP with a Dehaviland wing: pump flaps down more, if you want to go DOWN pull nose up more. The airplane beged him to lower the...

Pete did not very early J3's have a factory aileron top seal?
I think Spruce still offers a kit for sealing the Ailerons. From pictures looks to be bent sorta similar to standard flap seals. I have...

One should not forget that with your same 0235 engine, Piper chose Edo 2000's for the original PA-12. Which contrary to popular believe; was actually not much heavier than your airplane....... ( My...

I have both standard gear with 31" tires; and 6" extended Javrons gear for skis, the weight difference in the gear legs is ounces not pounds. note: The Cub sits nearly the same either way, prop...

I think if you research it you will find even though the tags say 1800. Those floats are very similar to 1650's in actual floatation......... On an 1100lb Citabria they take water OVER the front of...

Dresser Tires "Aero Classic" 8:50 ( pillow soft) tire would do about anything your likely to ever need to do. Less than
half the weight of a 26" Goodyear ( Blimp) tire; that are about "rock hard"...

Vacuum pump pad ???........ As Tom suggested, likely just a bad gasket?
E

I think �� you will find that is simply a PA-14 front seat, and part of the package that the Piper factory suppled in the " conversion kit" (all PA-14 parts)THEY put togeather for "Marden Airways"...

Gary,
We had two Helio's at Valhalla Lodge one on wheels and one on floats. They are fantastic airplanes, however because the slats are spring loaded so controlled by your forward speed, they work...

61380

Double posted for some reason???
E

As much as I like a TaylorCraft, and they are a wonderful little airplane with great performance. Because of your physical demension's, after you "try getting in a T Craft" be sure and try a Champ...

https://photos.app.goo.gl/fXJpNMm7RqQ646Wr5
Here is the Host: And master of ceremonies; Sunday morning after scrambled eggs with Maine Fiddleheads, Crane Bros fried spuds, Jimmy Dean and Peet's...

Gosh it sure looks like, the cover is going to stay well put with 15 screws in it.!!!:wink:
Anyway what STC was used to install the 18 feathers on your 12...??? Was it a stand alone STC, or part of...

Looking pretty spiffy Tom......:wink:

Glen,
Does the 12 your rigging have original gear on it or has it been converted to 18 gear legs? That will determine what it takes for a front fitting??? The Edo drawings call for two Additional...

What kinda specs Glenn???