Search:

Ly-Con is a dealer and placed the order. Continental shipped the complete engine to them and they pulled the cylinders for the magic, reinstalled and Dyno ran the engine for about 3 hours then...

IO520D factory reman ordered thru and delivered to Ly-Con for Port/Polish/flow match and multi-angle Valve Grind then Dyno run.

53676
This is one of my cylinders looking up the exhaust after it...

Follow-up:

The new engine and prop rebuild has the family truckster running like a swiss watch (thanks Continental for the re-man, Ly-Con for the magic, Foster’s for the prop rebuild, Aircraft...

Nope and I have moved the portable around that I use in my 180 a good bit in the Cub to confirm the readings from my hard mount probe which is located under the panel and annunciates on the CGR30P.

Really good, obviously took awhile to put together, many thanks.

Watch for C130’s between the ridges in Arkansas, I’ve met two in those confines but have always been able to reach them on Guard.

30, give or take.

Just display VS on your 496 or 796, it’s pretty sensitive. Especially a 796 with a secondary gps input like ADSB-in it’s sensitive enough to fine tune the trim with, do it every time I fly.

They are still listed for sale but there are also complaints on several other forums about their being rigged for silent running for the last 6-10 months...

If I could get Horizon to answer the phone I'd ask them...

There is only one opinion that counts and Horizon states that recording tach's per the FAA are to show engine time per Horizon's Instructions on page 12, next to the last paragraph...

Mine is in engine time which I like.

Thanks, I’m swapping like engines so hopefully this part will be easy.

Anybody know if the tach time is field re-settable and if so maybe have the instructions?

Haven’t had a chance to do much with the Aspen but we’ve been being careful to sneak the new engine on hopefully without anything else noticing.

53230

I ocassionally use the Airframes bags which work well but get their pour valve as it really helps. I just lay it on the tank cover and put the tube well into the tank (for spark protection) open the...

Great to hear from you Cloudy, glad you’re still on the good side of the snow. Merry Christmas!��

OC

My 77 came with them, not sure if it was an option or a mid year change. Also had the later required rotating beacon.

Congratulations

Thanks Bill!

https://player.vimeo.com/video/490022823

We initially didn't install the warning (aka idiot) lights but last year I had them put in and I like it far better as they are a good attention getter for when something is amiss.

Well good but I'm still PO'd at the way I was treated and what we had to go thru but glad they have seen the light, I mean the dark...

Been there done that to the point of being ready to rip it out and send it back... their belief (the tech actually said this to me) is you need full bright at night because it's dark so I asked if he...

You are correct, but the real question is why don't they just include one...