Reminds me of my first spin with instructor (unintentionally on my part) but we were doing slow flight and he mentioned the ball a few times, then he shut up and let me learn why that was important. ...
Type: Posts; User: mike mcs repair
Reminds me of my first spin with instructor (unintentionally on my part) but we were doing slow flight and he mentioned the ball a few times, then he shut up and let me learn why that was important. ...
https://m.youtube.com/watch?v=4z0mygz_K-8
Sent from my iPhone using SuperCub.Org mobile app
Hopefully someone learns something from this. I have his books from 3 decades ago. https://m.youtube.com/watch?v=x8PDRAsMDXc
Sent from my iPhone using SuperCub.Org
He was one of our flight training instructors in Naknek, when he was Commander of the King Salmon air force base back in?? late 80's or early 90's...
he got all excited when some of our January...
I think Atlee originally just resold Jensen gear under his brand......
Sent from my iPhone using SuperCub.Org mobile app
I didn’t know cabane v varied? Shock struts and legs did on extended gear, length & width(stance?)
Sent from my iPhone using SuperCub.Org
https://abcnews.go.com/US/wireStory/faa-approves-fully-automated-commercial-drone-flights-75287845
Sent from my iPhone using SuperCub.Org
Go anyway
What country do you live in?
Sent from my iPhone using SuperCub.Org mobile app
used to only be $300 in early 90's.... and a brand new factory cub was only $36000 in the 80's....
Turn off your TV and radio. Go out and Live you life. Haven’t owned a tv in??? 12? Years(except used as a computer monitor) and haven’t turned radio on since mid March when the bs started. Deleted...
Never squared off wings without lengthening ailerons or moving them out. But have been hired to make wings back to round wings after severe crashes from lack of aileron control on squared off wings. ...
Replace it
Sent from my iPhone using SuperCub.Org mobile app
http://www.supercubproject.com/drawings/pdfs/A3310015.pdf
And add LE to spinner distance.
Sent from my iPhone using SuperCub.Org
Burl sells it all drilled for trim pin use. Burlac.com
Sent from my iPhone using SuperCub.Org
I know Reeve Airmotive up here in Anchorage used to carry them, not sure if they still do, as they quit carrying allot of useful parts after they were bought out....
I thought I’d seen them on spruce. But can’t seem to find them at moment searching there... since I don’t know their search term!!
Sent from my iPhone using SuperCub.Org mobile app
My shop project. Not a customer project yet. Still practicing
Sent from my iPhone using SuperCub.Org mobile app
Clocks ticking on your bill at $1.50 a minute......
Sent from my iPhone using SuperCub.Org mobile app
enjoy cabin quarantining!!
EXCEPT, that leave out the VERY IMPORTANT FIRST STEP, level plane SIDE TO SIDE using front spar carry through spar(or floor if plane was NEVER wrecked.....) before doing the dihedral measurements...
Yes the original rigging instructions Service bulletin. It think Univair has it online?.
Sent from my iPhone using SuperCub.Org mobile app
.020” 2024T3 is what Univair uses for leading edge skins.
Sent from my iPhone using SuperCub.Org
Think we always used just #6 pk screws for installing tips. No need to get any bigger or nut plates. You will have many screws holding on the tips
Sent from my iPhone using SuperCub.Org
Rerig per book. I use front carry through spar as sideways level point.
Also once you have fuselage level sideways, if you have a turn and bank or just a ball, center the ball now by rotating...
Google “fur sewing machine” they have a separate function/move to them to pull the hairs out of sewn seam before stiching. I forget the exact name, I have one in garage. Bonis?? Brand??
Like...
