Search:

Wag Aero have a copy:
https://www.wagaero.com/instruments/oil-temperature-pressure-gauges/3-1-8-oil-pressure-temperature-gauge.html

I have used these with success.

Andrew.

Engine would've stopped long ago if the oil wasn't circulating..........

Hi Doug,

Just the right amount.....

Yeah, I've got about six of them too! I would like the "other" part number like what Steve showed as the adapter nuts I have should fit into those.

You won't see "evidence" of adapter nut use...

Yes, and that is the way it is flying around at the moment - see attached pic. But I have no oil temperature indication. The gauge was checked before installation and I have checked it still works...

Steve,

What is the part number of the oil filter housing without the shoulder for the bulb? All I have is 62815's which have the shoulder in my picture attached. The bushings I have (which...

I have the original combination gauge. US Gauge I think.

Andrew.

Can anyone provide a good part number for the oil temperature gauge bulb bushing that screws into the oil filter housing and the temperature bulb screws into that?

Hopefully what I am talking...

Marty,

Search here or Google for Piper SB 1172A. It should provide all you need to know.

As Brian says, normally fit special Piper bolts P/N 13241-000, but for an experimental you might be...

The PA-22 ribs have extra cap strip section riveted to the lower rib cap, centre two bays. The PA-18 ribs don't have this add-on. Otherwise they are the same; at least in the aileron bay. Colt...

Down here in New Zealand where everything costs double there is no way I can afford even the old 26" "tundra tyres" let alone the bushwheels that everyone is talking about. I've been running 8.50x6...

I thought that was why Piper ran the rudder cables above the floor. You slip your maps etc. between the cables and the side panel. I've been doing that since I was a kid!
On a couple of rebuilds I...

Crash,

Does that 1/2" foot work well? I never thought of that.

I used .025" thick 6061-T6 on the last Cub and it was a good material to work with and a lot tougher than the old super-dentable...

Come on! Ribstitching itself is good therapy! Quite relaxing in it's own way.
Wait until you've done a set of Pitts wings all at 1" spacing.

Bill,

What you have probably heard about is this:
In a decent accident the only thing stopping the bottom engine mounts collapsing upwards and rearwards is the lower longerons, which forward of...

Thanks guys. Just waiting on a reply from Atlee. :roll:

Some very good pictures of the Atlee mod there. Atlee says the seat can come loose and send the occupant under the instrument panel. Doesn't bear thinking about really.

Has anyone installed the...

Tim and Diggler have got it right I reckon.

The technical explanation goes something along the lines of low manifold pressures means low combution camber pressures. These pressures need to be...

OK, since this topic is still alive....
I've just started a rebuild on a customers Super Cub.... you should've seen what someone had put in there before for a front seat shoulder harness...