Search:

it seems to be a better option then tempo paint, here are my buddies cylinders that we did along with my sump60229602306023160231

A little up date since I’m waiting on parts. Cerakoted some of the parts parts I do have, colors are coming out nicely.

I have also hade some miscellaneous hardware made from titanium, it was...

I’m a big fan of fronius equipment, but a everlast may work as well.

It’s been awhile but managed to get everything welded up and off to powder coating. Came back looking really nice, now just have to put it together lol 59638

If you have access to a 3d printer you can make the tool. That’s how I did mine and it’s held up great

As far as i know the vertical power unit does not have/or provides its own power. there will be a backup battery system for both g3x/vpx system in case of failure.

It also appears that the vpx...

Computer on computer is a good way to put it. It simplifies things for me since I’m starting from scratch and have no components. The layout of my dash has the 10” g3x with backup altimeter, turn...

Thanks Denny. Yes I have placed channel in place where the baggage doors will be. Thanks for the offer for the hinge material, I have some of that already.

58513

I 3d printed these up for a guy and was planning on using them for a cargo net. I’ve also got tabs to weld in for L track mounts. I don’t plan on putting heavy items in there but it would be...

Thanks for the reply’s

Yes I have added seat belt tabs on the bottom and upper for inertia reels.

I opened the box up and yes it is motor, I’m planning on routing the indicator up in the left...

Thats a good point about the weight of a motor changing how the door fits, did not think of that(i just finished the doors lol). Unfortuantly Im currently rebuilding the motor so hanging that isn't...

I believe that its jus a motor, I just received the kit from Javron and have yet to look at it

Well been making some progress lately, almost done, have to finish up fabricating the doors, electric trim and tabs, custom fitting my chair then off to powder coat!!! 58480

So the roller for the u channel worked great!! Before I weld these in I’m placing floating lock plates in for a multi piece boot cowl. I have a drill jig for making the holes but have found that...

thats awesome, do you think it’s better to have the center wheel as the movement wheel. I may have to redesign mine.

58176

the handle on the right side turns and brings the wheel in or out.

the two outer wheels are set to the outer diameter of the u Chanel and the middle wheel is set to the inner diameter. 58175

Well works been busy but finally got around to making a prototype for a u channel bender. 3d printed it now just need to give it a try!!!58174

Would anyone here know if there is a tool for bending the u channel for the gingerbread and overhead turtle deck?

I think Im questioning the placement of the tubes because if i put them in the wrong location, would it cause a structural concern. Seems as though it should not

thanks Denny, never gave any thought about the lip, thats good info to know

Well I finally received the tail section so it was out with the old and in with the new.

now that that’s completed, it’s on to the lower baggage. My question is, can I just make my own large...

thanks for all the replies!!! due to the condition of the lower/upper longerons just decided it would be quicker to order a complete tail section from airframes. Airframes said i should have it in...

5687556876

Good morning Steve, thanks for the reply. I am unsure as to what your describing. I took a picture for reference of a known good fuselage and checked the diagonals agianst that. It...

thanks for this, I tried contacting them the other day but no answer