Search:

Dad helped me install this this winter. Waiting to put a cover plate or fab a small box to fill the center. Enjoying the layout so far. 54975

mines safetied in but nothing to keep from pressing to drain

Mike I agree, and as stated I kept it to what I felt I need. Also, I don’t wear it on every flight. Only cross country over or into inhospitable terrain far from help. Otherwise I have the kit...

Sorry to link to another site but...

https://backcountrypilot.org/knowledge-base/safety-and-survival/177-the-survival-vest-philosophy

I watched this video several times and really enjoy this...

So flew the cruiser for the fourth or fifth time today since our extensive annual. Had the throttle jam on me at about 50% power on takeoff but got it to clear. It happened again, so returned to the...

there was last summer

If we’re not on fires yet I’ll be there

I fly twin otters all summer fighting fire in the west. It’s hot as balls. Never had an overheat issue on an iPad mini in a case. I also don’t put it in direct sunlight and expect it to work. ��*♂️...

Thanks Steve. One less thing to stress about.

So in some trim positions, my bungee control cable goes totally slack at one end of the elevator play and bows out to hit the fabric. There’s a keeper that keeps it on the pulley. When you move the...

Never had anything but good customer service with them ��*♂️

Functional and just removed from the airplane. Fair offers considered. Will trade for -12 parts

How did this turn out?

Done.!

He must have never made it....

I’m very glad we’re not doing a ground up. MT12 did that for me in 2012 ; ) but it was one of a few whew moments we’ve had doing this deep annual. That new panel is getting a few last holes next...

We got it : ) and I can now see what you meant by ‘centering the horn’. Both our methods achieve the same thing, I just think we had a language separation.

anyways...

we put our new link in...

Are the limits you’re talking about the stops in the wing the bell crank hits or the internal moveable stops?

Thanks for the advice. As for starting my with the horns centered, I feel like that’s essentially what one does by putting the horn at the physical stop with the aileron at it’s down spec, in this...

They were under to begin with. Control cables are an absolute last resort. Currently removing a link at the control horn and fabricating new slightly longer link.

54378

Yes. I opened them wide open so that they aren’t interfering at all.

Looking for some advice about rigging ailerons on the -12. We weren’t getting correct throw, and the rod end/bearings were corroded badly. So we replaced the rod ends and are trying to get rigged...

I want to find out the why for sure, but my IA implied that screwing something into the panel could be considered installing. We will go with that for now and will use 3M dual lock. We’ve used it...

New never used. Make an offer. $38.49 new.