Search:

Thanks. I’ll give them a call

I need a different mixture control lever for the MA3-PA carb for the O-200. This lever moves fore / aft and is aligned with the center of the oil tank. I understand there is another lever that...

That's a great story Steve, teared me up thinking about my Dad who died a few years ago from cancer after 50 years as a heavy equipment mechanic. For the last few months of his life he'd come over...

Did mine like Steve says above, allen head welded to the mechanism. You can just see the hole in the fabric for an allen wrench that I burned through the circular patch in that area . I cut an...

Bob Barrows makes the oil sump, they are on his website randbaircraft.com
.040 baffles with some beef up areas

Panel is laid out and cut, I'm having Green Mountain Avionics wire up the interface between the G5 - 660 - GMC auto pilot / servos and the GTX ADSB transponder. Everything fits fine, I would have...

I saw your 170 the other day on the south ramp, I'm in the north hangers. We'll have to meet sometime soon.
Dave

There are no flying Companions yet, first kit was just delivered. Patrols are hard to come by and seem to get snatched up fast. I see you posted on the Bearhawk forum, good place to keep your eye...

Which version are you looking for?

I put the Trig unit in my Super Cub and like it a lot, as stated much better for a small lightweight panel. This guy wanted to stay all Garmin, he writes the checks.

I’m installing a GTX 345 all in one in and out in the Bearhawk LSA Owner flies under class C a lot so he felt he needed it. Just started the panel but it looks heavy and complicated but if you need...

Thanks Steve, I ordered one from Univair already. The other side is fine but may replace that one to match.
Do these Huffs kick off with brake pressure?

Looking for this parking brake if available. Doesn't seem to be a Scott unit, or maybe it is but there are no markings. This one has a crack at the thread area. Better off to just buy a new...

I heard Goldberg’s Patrol was going to be in Vermont Nice plane.

Some handheld lasers have a lock feature for a straight line at any angle I use that but I find it’s just a guide, adjust to ‘look right’. A compound curve sometimes looks better not perfectly...

Did you get a FA for the Summits? Through Portland?

Engine is on and the cowl and boot cowl area are coming along. The motor was built up by Bob Barrows - O200A with forged Wiesco pistons he has made up for a 9.3/1 compression and the ability to run...

Bah Hooey!!
45234

What’s the Saturday plan. Hope to meet up with y’all

Thanks all. The registration wasn’t bad, they wanted to see a complete aircraft before they would consider it so after it was all together we sent pictures from every angle with a registration...

Just to close out this thread. N1938A received it's airworthiness certificate on Monday the 7th through a DAR from the Hartford FISDO. Lots of paperwork was exchanged ahead of time through email...

Just like Dakota wing kit too, yours might be packaged and labeled somewhat better.

Charlie, you're famous now too, saw you on WCAX. Nice job!

You should see her other plane - a Cheyenne with lady parts painted on the belly.

Not sure about that Marv, but I've had lots of practice. I'm spraying this LSA Bearhawk tail now and it's looking good.