Search:

Yep like others have said AeroLED has a great product and customer service! I’ll probably set my Super Cub project up with their stuff.

Aircraft Spruce does a pretty good job of building custom length lines-
https://www.aircraftspruce.com/catalog/appages/hoseassembly.php?clickkey=9950

$470 for the AE466 brown silicon fire sleeve...

Congrats way to hang in there!

I flew 135 everywhere in the state except the Aleutians. Spent a year in Bethel flying a Twin Otter. My one piece of advise is to do whatever it takes to not hit the...

It’s all about the timing! ;)

I had the exact same problem trying to put a set of PA-12 Dakota Cub fiberglass tips on a Pawnee. I set them aside for a while. Let us know what you figure out.

i don’t know the answer Steve. I do know I am never going to spray a solvent based system again. Well I guess water is a solvent but you know what I mean. I shot the Pawnee flap in very subpar...

OK here’s my final review. This stuff is fantastic! Why isn’t everyone using Stewart’s system?

Bit of a learning curve switching from Consolidated Aircraft Coating products but well worth it. Once...

Finished!

54090

54091

First fog coat is looking good! The gas company is going to love it. I have it cranked up to 68 degrees in here.
54088

Nice!

Yep it’s amazing how fast the solids settle! Seems like about half of it settles in 12 hours. That wasn’t the issue with my runs though.

Like Marty said I have a Tekna Pro gun. With a little experimenting on cardboard I found 1/2 turn on the material knob and 25 psi works well. Part of the problem was I am used to shooting butyrate....

Talked to Marty and he helped me get my gun dialed in. This stuff sprays really different then anything I’ve sprayed on fabric before!

53990
I am going to sand it down tomorrow and shoot it...

I got all the solids mixed back in before I sprayed. Doing the second coat now with the flap laid flat.

Well I finally got started on spraying the flap. Right off I can tell spraying with the part vertical isn’t going to work at 65 degrees. I thought I was spraying the first cross coat pretty light but...

I’ve done most of my seats with heavy polyfiber or ceconite.

I am going with a broken gear. Let us know what happened.

Yep will do Marty. I’ve been following the manual and your videos closely.

Charlie

I might spray it in my parts room.

Well the flap is ready to spray. I was hoping it would warm up a little but no dice. We’ll see how the primer and paint likes a 65 degree hangar.

it was a bit of a learning curve. I think time...

Looks like England

You’re welcome anytime! I have a spare bedroom.

Ahh man you should’ve swung by and said hi!

Yep I’ve been doing that. The pic was from the end of the day.

I don’t think they put it out but they endorse it-
https://www.aircraftspruce.com/catalog/cspages/fabricpro09-05728.php