Search:

Type: Posts; User: bob turner

Page 1 of 20 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    17
    Views
    981

    My experience is even with flaps up, a full power...

    My experience is even with flaps up, a full power climb out will make them shake pretty good. Most don't know that because it is really difficult to turn around and look - especially for older folk....
  2. Replies
    52
    Views
    22,688

    I haven't read the STC; I thought it was a 1/2"...

    I haven't read the STC; I thought it was a 1/2" square tube. Hard to believe that tube adds anything structurally, but a friend did a heavy brake application on my Cub and the little Vee- thing...
  3. Replies
    17
    Views
    981

    My trim cable and pulleys have 6700 hours on...

    My trim cable and pulleys have 6700 hours on them. Always worked great. I shot some Tri-Flow on the jack screw in October, and the trim system stopped working in November.

    I assumed the cabl or...
  4. SAFE just sent me a note saying "beware of the...

    SAFE just sent me a note saying "beware of the complicated drop-downs on the new medical form." They said it doesn't apply to BasicMed.

    BasicMed is a winner! I disagree a lot with Jim Inhofe,...
  5. The J3 and Super Cub have similar drag profiles. ...

    The J3 and Super Cub have similar drag profiles. One year long ago a buddy and I set out for Lock Haven. His was a PA18-150 with VGs and cables; mine was a stock J3 with 85 and wing tank. We flew...
  6. I guess I don't run 180 hp engines at 2200 rpm. ...

    I guess I don't run 180 hp engines at 2200 rpm. Mine is placarded red from 2000-2250. I run it 2400 squared until I hit full throttle. Getting old and tired, but fine wire plugs make it think it...
  7. I have flown both, and far prefer the 160. My...

    I have flown both, and far prefer the 160. My Decathlon has the 180, and I kinda wish I could replace it with the 160.

    My impression is that the 160 burns 7 1/2 gph; the 180 in the Dec with fuel...
  8. Replies
    45
    Views
    10,620

    Can't believe I did not contribute here. I see...

    Can't believe I did not contribute here. I see 6000 hour Cub galvanized cables. Just saw both rudder cables replaced after 600 hours on a Super Cub. stainless. But worse - the restorer put...
  9. Replies
    5
    Views
    393

    Mine are original. They seem dead soft. I am...

    Mine are original. They seem dead soft. I am guessing .016, like the leading edges. I have a micrometer in the hangar if it is important. The lower ones have 90 and 180 degree folds. 2024-0? ...
  10. Replies
    10
    Views
    535

    I use Grove masters. They really need a bleeder...

    I use Grove masters. They really need a bleeder screw in my opinion. I drill and tap 1/8 NPT as far forward on top as I can get. I can use a clear piece of model airplane fuel hose into a jar for...
  11. Replies
    8
    Views
    918

    Using the adapter, as the strut is folded through...

    Using the adapter, as the strut is folded through 180 degrees the bungee un-stretches a bit. That resulted in one side being stretched more than the other. In retrospect, the "engine hoist" method...
  12. Thread: J3 takedown

    by bob turner
    Replies
    5
    Views
    570

    All of that. The nails are the most important. ...

    All of that. The nails are the most important. Have somebody else double check the wing root to make sure all wires and cables are disconnected. All of them! Ten minutes if prep was complete with...
  13. Replies
    16
    Views
    757

    You are correct. I am only familiar with...

    You are correct. I am only familiar with Aeroquip. I rarely build these things up. I use them only for engine oil applications - oil pressure gauge, oil cooler, etc.
  14. Replies
    14
    Views
    916

    I have seen problems with parking brakes on Cubs....

    I have seen problems with parking brakes on Cubs. Four different aircraft, two different systems - inadvertent brake lock. Only damage so far was a broken tail wheel. Usually the owner is not aware...
  15. Replies
    16
    Views
    757

    Good idea with the Dremel. I just borrow a...

    Good idea with the Dremel. I just borrow a mandrel.
  16. Replies
    8
    Views
    918

    Thanks. I made an adapter yesterday, and will...

    Thanks. I made an adapter yesterday, and will try it. Yes, shock rings can kill you. A local mechanic lost an eye. I shudder when I think of how I replaced my first set.
  17. Replies
    16
    Views
    757

    I think once you deviate from the original you...

    I think once you deviate from the original you can use anything you want. I am pretty careful to specify what hoses and fittings I use on field approved brake systems. For Cubs and Aeroncas I...
  18. Replies
    16
    Views
    757

    Original was automotive. #4 inverted flare and...

    Original was automotive. #4 inverted flare and 1/8" pipe. We have not yet figured out which Plymouth the original flex hoses came off of, but current production hoses are 4000 psi operating, 5000...
  19. Replies
    8
    Views
    918

    We have one of those. Looks like it stretches...

    We have one of those. Looks like it stretches one side at the expense of the other.

    But do we need HD bungees?

    oops. Answered my own question - 1080 HD.

    The shop sent a pair over to be...
  20. Replies
    8
    Views
    918

    Hydrasorb bungees?

    Seems to me we discussed this, but a search sent me to a thread about footwear.

    160 heavy Supercub, always on pavement. Really small tires. 1280s or 1280HD?

    Also, my J3 bungee tool doesn't...
  21. Replies
    3
    Views
    403

    Robbie Grove has one, and has retained the toe...

    Robbie Grove has one, and has retained the toe brakes with his master cylinders. Only Tango Cub I ever flew with decent toe brakes. Strongly recommend you convert to heel brakes. Might save you a...
  22. Replies
    27
    Views
    1,688

    That has to be one of the best looking Super Cubs...

    That has to be one of the best looking Super Cubs around. The paint scheme is a delight; the lack of major mods has kept it looking classic, and the Goodyears do not overwhelm the rest of the...
  23. Replies
    27
    Views
    1,688

    Yes. They wear out rapidly on pavement. When...

    Yes. They wear out rapidly on pavement. When they started showing cord we shipped them to a guy with a grass strip. He was happy!

    I am with MTV - I run 8:00x4 Goodyears, and they do wear like...
  24. Put an ash bow on there, and keep it stock? Keep...

    Put an ash bow on there, and keep it stock? Keep its value up? J3s fly just fine in stock configuration with a little horsepower boost. Mine flies fine at stall with a little power.

    If you mean...
  25. Replies
    27
    Views
    1,688

    A grass strip in Kentucky ought to support...

    A grass strip in Kentucky ought to support 6:00x6. If you just want big, the 26” are plenty good for improved grass strips. If you run them on pavement you may need a second job to keep them in...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4