Recent content by fatcub

Got it. Thanks a bunch Scott

Thanks Eskimo, I was in there last week and bought the STC. I will call Jeff and see if he has a copy. Scott

Not necessarily to make the feds happy, mostly I want it to go in my books and to get what adhesive is used. As I recall it's Scotch-weld or like that. It's been years and years since I installed a set of these. Scott

Greetings, I was hoping one of you fine folks would have the GAR-AERO Drawing No. 10001. This is the drawing for the installation of the 10 inch main wheel adapters. I have searched but cant find it anywhere. TIA Scott

Good idea, I do have their fork on the nose. I will call them.

I concur, going 8.50 up front

Greetings, I am in the process of upgrading from 8.50s to Goodyear 26s on my C182K. I was hoping to find a someone that has gotten a field approval for this already and possibly get copies of their paperwork. Thank in advance Scott

Jeff, when I started this thread I feared the worse for you 2. I had already heard through the coconut telegraph about it. We are all in your corners and giving our good karma up for you guys to use. Thank goodness, it sounds like your taking advantage of it and cashing it in. Take care. Scott...

Thanks Steve, Hopefully they will be around the campfire soon with you guys. Scott..

I am getting reports here of an Incident involving a pacer. You guys on the ground over there know anything??

Another plus for squared tips (not so much for the J3 for the obvious reasons) is the ability to add length to the ailerons, to the flaps or both. Scott..... P.S.= Jerry,,,, Lets watch the fat cub cracks now...............

Tousche, mon ami Scott..

From everyone here at the "Big Eskimo" airline,,,,,, Thanks for forcing the issue and making the right thing happen. All of the U.S. airlines could use a bit more of that mind set. Scott....

This is a "Ask 10 people get 10 answers" type of question. The simple answer would be to just order the proper univair parts and be done. Myself, I just went through this exact thing on my build. So I checked out several cubs in my area to see what they were set at,,,,,,,,,,,,,,,,,,,, They were...

They are easy to make, All you need is a band saw, drill press, sander and a cheapy hydraulic press. Scott...