Hi All,
We are having our Second Annual Cub Gathering on Saturday June 10th at Modesto Airport KMOD from 7:30AM to 11:30AM. This is our monthly CAF fundraiser Breakfast and well worth the flight in ($10 donation).
Last year we had over cubs on display. We need a few more Super Cubs (besides...
Hi All,
We are having a Cub Gathering on Saturday June 11th at Modesto Airport KMOD from 7:30AM to 11:30AM. This is our monthly CAF fundraiser Breakfast and well worth the flight in ($10 donation). Our goal is to have 20+ cubs on display. We need a few Super Cubs (besides mine). Bring any...
Nor Cal CA66
In Nor Cal, CA66, Monterey Bay Academy. WWII Grass Stearman Strip on the ocean south of Santa Cruz. Park your plane and have a picnic on the table overlooking the beach. Departs over the ocean and beach. Not open on Saturday. Keep it a secret!
Thank you all! Got it started Saturday morning cleaned (as best as possible) silicon spray and it started up. Did notice that the bearing in the front has a lot of play. Think it was binding up the motor. Will be going light weight sky tec asap. Thanks again. Ben
Wal, it never turns over really fast, but it did turn over but did not "sound" right. I would just hand prop it, but the hung up bendix creates too much drag. Will get more time to work on it tomorrow and hope to get her home!
Thanks for the feedback and help! Ben
Flew to see my daughter about an hour away today. When I went to start up the bendix (small starter gear that engages the flywheel teeth) extended into the flywheel teeth and failed to retract. The engine would not start and I could not get the benix to disengage
starter is prestolite MZ 4204...
Goal for 2014 was 60, plane down for 4 weeks and no long trips. After seeing the numbers above I feel like a poser only logging 53.1. All but .5 in the Cub. All tail wheel! Everything logged in an old fashioned "book". Planning on >60 in 2015 and a "cub coast to coast" in 2016. Need to...
Hello Anne, I have not flown I-80 out of reno as I usually go south of Lake Tahoe over Carson Pass to see the lake and miss Reno. Shouldn't be a big deal. Fly early to avoid winds. Truckee airport can be very busy with bigger faster planes. Coming from the east the Sierras rise up very...
Installed bungees today and went to install and on both legs the attachment ends are not aligned. One end the bolt holes are off 90 degrees. Is there a twist to the hydro sorb that I did not set correctly before bungee install? Can I fix with bungees installed or do I have to cut bungees and...
Thank you all! I should have mentioned it is a PA-18. I called univair and they charge $17.50 per bungee x4 and they turn them around quickly. I'll pull them tomorrow! Installed inertia reels tonight! The only problem with sending the bungees out is waiting to finish then annual!