Bearhawk Builder

Man it’s a different world in central VT. 3 feet on the ground and everything is frozen.

Weld it, anything else and you'll be back here soon except with more contamination for the welder to deal with.

New Companion model, basically their 4 place fuselage without the rear seat or large baggage door. Shortened mount and Patrol wing. More to come

John, have you mechanically etched aluminum instead of using ekoetch before ekoprime? It's a little hard to pressure wash a wing in these...

I'm dealing with Summit now for a Bearhawk project and modifying their attach bracket. Different animal but they would likely be inclined to help...

I'm in, where do we start. I've never gone through the process. I assume the engineering needs to be looked at, is it a matter of getting drawings...

Tom we need you as a DAR

So that's 1 1/4 axle? That's what I'm trying to find out.

Can you give me the kit number. Are they really 1 3/4" axles? I don't see that size listed for the Grove 6 inch wheels.

Did you get the right kit from Van's? They have one for both parallel and angle valved engines. Assuming you did, your options are to drill the...