The data plate says it is a 470. I specifically found a 520 donor engine with a VAR crank so I didn't have to deal with a scenario like this. Pulled...
Someone indexed the prop wrong and aligned the non-counterbored holes in the prop with the long bushings in the crank and pushed two of the bushings...
So I have seen this twice on 180 hp Super Cubs recently. There is a proper prop indexing forced by the machining of the prop hub and the bushings in...
Number of things. Pilot had 30 hours of tailwheel, missed the test area, decided to drive to the runway after missing the test area, too fast, pilot...
A used one will not work. The rudder is custom drilled to the steering arm. Those holes get wallowed out and the arm moves inside the rudder. Dakota...
Yea, at $85 an hour my time is better spent installing new. I also read some information that they are only good for a few cycles like that. Not sure...
Home Page
Find latest posts