I noticed most Cubs have 2 big cable fairleads, and 1 small one on each front lift strut...is this necessary to eliminate cable vibration? Or, can a...
These were a little less than half the cost of airframes struts and several hundred less than Univair....I had to build them up from the parts.. yes,...
I’ll weigh them....yes, southern aero out of GA. My guess is equal or a pound or two more than J3 struts....they are the same profile (size) as stock...
The front struts are together..I have the rear struts drilled and have only to drill the eye bolt holes at the jury strut locations...I’m doing this...
I’ll mount my relays right above and to the right of my battery. On another note...Wayne from Southern Aero finished up my strut fittings...once they...
Ok, I already did put in the diodes...I was just figuring out final placement of these relays. It sounds like you prefer inside the cockpit... makes...
Own J3/L4 Cub, 90HP Taylorcraft on floats, PA11 Exp project
Home Airport:
My own
Location:
Upper Peninsula of Michigan
Occupation:
Substation Supervisor at Power Company
Biography:
30 year private pilot/SES/CFI-SP...almost all in Taildraggers/floats/skis... I live on a lake where I keep my TCraft on floats The Upper Peninsula of Michigan...also own a J3/L4 and am building an Experimental PA11
Find latest posts
