You might look at the Airtrac 29-11-10’s in 4 ply. I don’t think they make the 8.50-10’s in 4 ply. Also you can get them shaved for even lighter and...
I use 36” Tubbs, a little pricey but work great in the ADK’s. The snow is heavier in the east so this is my choice. Also work when collecting sap in...
I have run the 29-11-10’s on my 180 and now the 185. Had Gar’s on the 180 and ABW 10-10’s on 185. Hands down the best is the ABW 10-10’s . Also flown...
Really don’t think I’m going to be going into real ruff stuff any more. I didn’t renew my big game guides LIC a few years ago so flying a bit easier....
Hi Tim, breakfast on me for sure. I appreciate the offer but I have 8 of them and just didn’t want to throw them away. It’s one of those too long of...
I had the exact same problem trying to put a set of PA-12 Dakota Cub fiberglass tips on a Pawnee. I set them aside for a while. Let us know what you...
No, I have a couple of sets of valve covers that have been sitting around. One set heavy rust, I just hate to throw them away at 41.00 each. I’m just...
I have a set of rusty valve covers on a Lycoming. I cleaned the rust off ,just wondering what you guy do to them. Paint, powder coat . POR15, or just...
i don’t know the answer Steve. I do know I am never going to spray a solvent based system again. Well I guess water is a solvent but you know what I...
Like Marty said I have a Tekna Pro gun. With a little experimenting on cardboard I found 1/2 turn on the material knob and 25 psi works well. Part of...
Home Page
Find latest posts