DENNY

I mostly use a strong back and weak mind to move the planes. When it gets too slick out or need to run over to IA's hanger I have a 96 Polaris...

I learned to fly in a Pacer with a very patient CFI. Over the years some of the issues I have seen with new tailwheel pilots include fear of brakes....

If you have a 160 hp cub the 8242 is just a bit flat for that unless you are working it hard. a 43 or 44 would be better for most use. DENNY

The extra flotation would be nice, but it comes with a price many do not consider. Trying to get that mass of tire moving on touchdown is something...

I would agree with Crash, JR. if you are going to be taking students places that require a 35 inch bush wheel to land, you had better get yourself a...

White is a very hard color to see in the air. Consider red wings so it is easy for others to see you. DENNY

When the door opens the force starts to pull the top away from the building, it does not stay vertical. A friend was renting a local hanger that had...

I would agree with Steve you should have been making metal if the cam or lifters are going bad. DENNY

One thing to note for tire longevity is if you are not going to fly for a while pump them up quite a bit. That prolonged sidewall bulge is hard on...

Looking forward to report on how much top speed you use with the slats. I would like to have them but don't want to loose a lot of speed on long...

You can use mine, I just have to find an extra hanger key for ya. I will be out tomorrow putting on skis. Sent my number by PM DENNY

BUMP!! That time of year again. Had a cub stuck on 35in tires on the ski strip with open runway next to it. Please don't tear up the ski strips...

You apparently have all the facts please post them for us. DENNY

In the USA more than 29,000,000 people had covid. More than 500,000 died. 153,000,000 million vaccine doses given with no deaths due to the...

Yep, I fly with two white wing cubs and they are very hard to keep track of!!! Alaska camo red or yellow very easy to see. DENNY

What is the square ft weight? DENNY

I don't think you can splice a spar inboard of the strut if that is what you are talking about. But I have been wrong before. DENNY

Gabe Don't be giving away all the secrets!! DENNY

Lean for best power while flying, leave it when you land and shut down with mags, or use finger to measure distance and pull that on start, or hold...

Send me a PM with your cell number I will send you a pic of my fuselage door. DENNY

Look at the Airframes 4 place Cub. It has a huge door with a low sill open to most of the seat 12's have a similar mod. I am putting a even bigger...

Don't bother throwing money/time at a slick mag. Just check the internal timing, if the problem continues get Bendix mags and be done with it. ...

If you are going to be using the full 2,000 lbs routinely get the 4 leaf. DENNY

If you have an an ACS Starter switch there is a service bulletin out and rebuild kit. Denny

Did you check the internal mag timing not just engine timing. Slicks are notorious for issues after human 10 or 15 hours. DENNY