bushwannabe

And less prone to cracking along the rib. Piper had stacks of dollar patches, cheap and quick

Sure is easier to lay a tape instead of cutting a bunch of circles Sent from my iPhone using Tapatalk

I shortened my flap handle years ago, cut it down to where the two screws were originally. After I could put my leg over the flap handle and have...

Aerocet doesn't even want to build little floats for Cub type. They are concentrating more on big floats and I doubt they get involved in the pods...

https://www.aircraftspruce.com/catalog/cspages/threads.php?clickkey=5872

Or a piece of 1/8" Plexi.

He likes to go.

I had the same for my previous Super Cub for carrying my dogs. Made by some friends of mine, it has a bulge covering the stick stub.

A friend of mine sewed me one like tackdog's. I think she gave me a couple of extras if you can make the frame to fit. It was made right off the L21...

Is he experimental?

The washer is a Lycoming part STD-619. They are reusable. Don't want to compete against experimentals in my certified Super Cub. Went up and...

Google search "engine mount bushings site:supercub.org" Spruce carries Lycoming bushing. ...

I have done quite a few pre-purchase inspections where I flew the airplane. There are a lot of nice looking airplanes out there that pass a pre-buy...

I make my own brake lines using Aeroquip fittings and Teflon hose from Summit Racing. Fittings https://www.summitracing.com/parts/AER-FBM1100 Hose...

I see way higher insurance rates on experimentals vs virtually the same certified aircraft with same hull values.

Go fly an SQ and fly an FX3. One flies very slow and one flies pretty slow but has lots of finesse and is a really nice flying airplane. They both...

I like doing dumb stuff. Over time I have gotten better at it. Don't really do it for others, I just like the rush I get from doing it. My Mom thinks...

You didn't know Lee Budde back then. Guess I don't know why you would blame Airframes for something Lee didn't keep track of. I would put a jackscrew...

I add the "X" in the tail and list it on my 337 with all the other welding I did on the fuselage per AC 43.13 as repairs and per the STC's.

It is 17' from the center of the main tire to the center of the tailwheel in a 3 pt. attitude

Two friends of mine went over and assembled the airplane. They had a blast. I would have loved to been in on that. The red tape was thick.

Johnson Creek Fly In is June 15 thru 18. Although we have "reserved" the dates with IDT, this year we are doing things a bit different. 1....

I have flown some of those fuselages built in 2000 and had no issues with trim. First I have heard of this one that I can remember which seems to be...

I don't remember that issue, only the wing incidence being off. The Smith Cubs had the tail angles inverted.

How does insurance compare between two equally valued Super Cubs, experimental VGs certified.

The NTSB found 5 occurrences, 3 PA12, 1 PA14 and 1 PA18. the FAA has found 12 occurrences. Not sure what all models they were on. Bottom line is all...

I fly with a group of guys every Sunday morning, sometimes there is two of us and can be as many as 8. We bar hop up and down the Brazos River...

I would look at the door frames IAW this Piper Service Bulletin. https://resources.univair.com/docs/sb-819-piper-fuselage-door-frame-tube-corrosion...

No but if he owns the stc and has done 40 of them, he would probably be a pretty good guy to ask…. Sent from my iPhone using Tapatalk