fobjob

If we go electric, unless battery technology makes some pretty serious jumps soon, we will probably use high temperature catalytic fuel cells for the...

A year or so ago I calculated what it would take for my cub....counting increased efficiency/weight of the power plant to give me four hours of 75%...

I got a bunch of air tools rejected from Hill AFB, took the duct tape mods off the triggers, put oil in them, and hooked up the air. Work fine....?

I agree with Mike. Impedance matching on the input and output of heat exchangers is important. Having said that, I’m toying with an exit air matching...

I agree with skywagon. The problem remains with the bottom of the cooler. It is probably getting too much heated air...Avoid any sudden angles in...

After a LOT of experimentation and measurement, the following things were the most effective at lowering chts.(67 cub, 150hp, @100smph 5500 ft msl....

Take a look at my photos section...I have some diagrams on airflow optimization through an oil cooler. In support of those, I was told once that...

Natural Selection WANTS YOU at that age.....

Enter into Google.. site: supercub.org CHT

Measure the suction side pressure with respect to static. If it’s zero, getting any further gains in cooling are problematic. Ill bet it won’t be...