Seaworthy

Great post Doc!! Bill

Pretty sure it’s on my thread somewhere. They definitely do not use a front strut on the rear strut. Without looking through my thread, I’m pretty...

And then you left without me in 2019! I’m still hurt. But there is always 2021, right? I have some time to work on my floating between now and then. ...

Thanks for waiting to take the picture after he was mostly submerged!

You might find some info that will help here. https://www.supercub.org/forum/showthread.php?53158-Building-a-Javron-Wing-Kit Although it is...

There are some wing documents here (scroll down to the wing section): https://dakotacub.com/index.php?route=information/information&information_id=12...

Lou, You’ll be pleased to know in the lower 48 we are practically exclusively a FedEx operation (only brown if requested, and big stuff gets...

$4,000 for the kit and all paperwork, plus USPS Priority Mail to Alaska is usually $30-$35. —Amy Sent from my iPhone using Tapatalk

Alex If it is on 31's with extended gear and has the usual 3200 TW your gear weighs 125 pounds. So if Edo 2000's weigh 251 then your exchange...

As weighed...... Installed an Airglass LT32 fuel pod. Pod and mount hardware weighed 27.6. Fuel pump, lines, wires, fuses and switch added another...

I guess I will be the bad guy. If you pull the 40 year old fabric off it will be a total rebuild. That will cost mucho money. You said it was an...

Great video Greg. Thanks for all the info and help. Bill

I just spoke to Jason at Atlee's and am glad I did. It may be just blissful luck that I haven't had any problems with the skis since putting on...

You might find some useful info here https://www.supercub.org/forum/showthread.php?53158-Building-a-Javron-Wing-Kit&p=756767&viewfull=1#post756767...

If you can’t piggyback it off of someone driving, freight forwarders can save you a bundle too. That saved one of my customers quite a bit of...

Steve Pierce - You are awesome! Bill

That catch has worked quite well for me. If you can reinforce the area at the latch it will help. Perhaps a 3" square of .032 riveted on would help a...

I used the one from Cub Crafters. Works for me. Wow....shows a little corrosion.....guess I have another item on the annual "do list" ...

I put a “liquid containment” bag on my birthday wish list and received one from Skycowboys. Haven’t had a chance to use it yet as winter is not my...

Crash, Jr, and all...thanks for the responses. Very helpful. I was unaware of the problem with autogas and the seams...that would be a problem. ...

You da best Cloudy! Da very best!