dgapilot

I’ve used tail Stands on 2-33 gliders parked outside lots of times. Decrease AOA and lots less lift. Also do 4 point tie down, pretty easy when you...

Wonder how that fits in with the crank bolt AD? Guess it’s better than loosing the airplane! Sent from my iPhone using Tapatalk

I’ve used a couple tube coping web sites. Most work pretty good, just need to mark a centerline to be sure you use the same center on both ends of...

Just this week, I got a number of field approvals for my PA-16, Sutton exhaust to make room, and EarthX battery on the firewall chief among them. It...

For anything that is 2D, I agree, make it out of Alcoa’s 2024-T3. Anything that has compound curves, it’s a lot easier to make it from 3003. ...

Most of the fairing drawings I’ve seen call for 3S material which would be 3003 today. Sent from my iPad using Tapatalk

Go for a Field Approval and put a Sutton exhaust on it. Gets rid of the AD inspection on the muffler. Sent from my iPhone using Tapatalk

Since he says the airplane is in standard category, whoever provided “approved data” for the changes should have provided appropriate rigging...