KevinJ

Not to drift off of this thread too far but...In the past, I’ve had a heck of a time getting the 10” rims off 35s. Jumping, prying, etc. This time, I...

If it is 84”, I’ll trade you for a legal 82”. I suspect it was measured with a faulty measuring apparatus. I have two of them. One of them is used to...

Jerry, what was the length and pitch of the catto you were using in the video? Are you still using it or are you running something else? Thanks

Went with your suggestion Flagold. Sure isn’t bad;-)....

What brand of brake pads/liners Ted?

Ole Kent is pretty legit. This my favorite. His Booby Flay beating chicken fried steak recipe.......https://youtu.be/BMu3rPI40wQ

All I can envision is a turtle head going back in its shell

Or take your spinner off and see what the hub says.

Are you sure it’s not an 82-43/44 borer?

What size axels?

To Mike’s Vs point. This is the aftermath of departure stall 700’ to the left of the centerline towards the end of the runway. Stall, left wing...

If mine were this big Bob, I’d run 8.00x4s also;)

Yes. “Visiting” is Texican for talking. Enter the Arkanstol deal this fall and you’ll have an excuse to come down and visit with us.

I know you better than that. You won’t be in the beer tent. You’ll be walking around visiting!

Hehehe. What’s slower? Running fast prop and dragging slow prop in a box or just leaving the slow prop on?

Damn. That’s stings a bit. I get it. How many tens of thousands do they have getting the approval. Several. For the same money however you could...

Peter, is this the prop with the whirlwind designed blades? If so, it seems like the rumor is that sensenich used the early blade profile causing...

I have no prior experience with this company so take this with a grain of salt.....I’ve been, however, in and around the saddle making bus. a year or...

https://youtu.be/-tjQwvqrvZQ Just think of the places Greg could go if his legacy death gear and Acmes wasn't holding him back!

Non boosted Cleveland brakes stink on anything over 8.50s. I might even include 8.50s as too big to run without boosters. To me it’s a safety issue...

The prop deal is kind of black magic. It makes my hair hurt if I give it too much thought. I’ve seen guys with sorry props get in and out of places...

Take the starter off your wagon Eric and I bet you’ll figure out why:-P

Greg, can you expand a little on lightening the 35” wheel set? Drilled rotors, light nuts, thin washers......? Neat cub. Thanks!