180Marty

That is a very nice thing to do. It will be interesting to see if it will draw people to Winifred that can work remotely for their job. The town I...

After reading the comment on the use of ACF-50 and loose,moving skins, I thought I'd expand on my experience with the stuff. I bought my 54 180 in...

I also think ACF-50 is better than zinc chromate because it weeps between skin laps and would also help if there is steel against aluminum. Just make...

I think most if not all of the exterior skin reinforcements are flat and nothing special such as the late model style piece ahead of the landing gear...

I still vividly remember Chuck Wentworth's words when I traded a 108 hp Lycoming for a 150(hangar collapsed on a Tri Pacer) for my PA 12 back when he...

Here is a picture of how my radiant heater is vented and then on the inside. Air comes in around the exhaust so is preheated.

You must not have seen my previous post. I have the Eneradiant tube heater in a shop within my hangar. It is an insulated 22 by 19 by 13 tall...