skukum12

Two thumbs up, superb and wholesome family entertainment!!!:elefant:

Lots of guys will say the mod will block the airflow between the trailing edge of the wing and the leading edge of the flap. Thus negating some of...

I would suspect no wax either. Regardless, if the OTX was installed on an aircraft, I would be sure to contact Lars at Better Aircraft Fabric and let...

Denny is correct. These and other important points are clearly lined out in the "Tips and Tricks" manual supplied with each purchase. You would...

^^^Part of the otx maintenence procedure is to apply the supplied wax not less than once per year. It provides additional UV protection, luster and...

Oratex is indeed an approved process. The individual that was refunded his money probably installed the "backsislde coated" version on his certified...

Oratex prefers a warm environment for installation. The glue is water based and CAN NOT FREEZE(capitalized for emphasis, not yelling.) Frozen OTX...

....an addendum, 182 yes. 172, no. 172 in my opinion could be the most boring airplane ever built. I have flown in, flown and watched a guy try to...

Dad just picked up a 206. I have a mission list as long as my arm for that one. Different planes for different roles. A 182 is a great choice and...

"Death Wobble," I had a skateboard like that.

Not velcro. It's an over/under clip.

Oy Vey. Auto land, AOA indicators, ADSB.....Let's just replace the pilot with a computer. Better yet, just s&&t can aviation altogether

Excellent point from MauleGuy. Where are the pictures of collapsed gear where the landing was conducted away from the hard surface? Grass/gravel/dirt...

Got it. I have seen the single plate mod spanning the brace wire attach points. I just hadn't seen the more elaborate T shaped plate.

Never heard of it or seen one. What's this all about?