Oliver

I’m curious why the issue with peeling tapes. there’s lots of tube and fabric planes in acro category that take alot more abuse than cub gear legs....

Aluminum? I tried this as a go-fast mod a few years ago. Clam shell aluminum covers, similar to Husky. I added a bit of airfoil shape via formed...

Tom, havnt tried it yet, landing lite bucket will be in the way of a straight shot in front of spar, is that the issue? You can remove the lenze...

Just came across this old photo, out of the gear leg of a cub, wings were equally as bad.

Im embarrassed to say I’m not sure when and what order they quit. I recently did a predawn departure and noticed nothing lit up when I flicked the...

Looking at installing Aeroled 11-1280-C-12 open to suggestions im wiring two cubs, one w original markers (one wire) the other, I’d like to switch...

good point Mark, airglass drawing calls for it but I guess a siphon would be broken by sucking air, assuming you’re plumbed to a port near the top...

Left wing root has less clutter, and less potential for sparks. be sure to install a quality check valve as high up the feed line as practical....

A ferry tank system I installed utilized airglas pump and plumbing drawings, but ran a fuel line and tee’d into the upper left tank site guage...

Marty, casters are handy to move it around but you’ll be chasing it around the shop when you need to lean on a bit to bend something. Even locking...