wireweinie

OK. So explain to me why it can't be the power supply when you have the correct voltage to the power supply and the tube has been tested good on the...

No issue with the voltage. Do you have a single power supply for all strobes or do you have one power supply each strobe? As you said earlier,...

Then stop trying to compete and come on up. Web

Those are good readings, then. Web

Where did you place the leads to measure that voltage? Web

The reg requires 'anti collision lights'. In my humble opinion, strobes at three points does that job just fine. Web

So the crazy lady walks. Web

Stranded in Juneau. Only way in and out of that town is to fly or cross into Canada. Both were barred for a couple of days. Web

The point of having them on separate switches is when you DO need to run one without the other it's possible. I.e., if you are taxiing near other...

The Whelen 650 series fits the Cub wing tip brackets as well as anything. Whatever brand/model you settle on, to do the job correctly, you will need...

. Your black lead is on the spar which is ground. A bad connection of the ground wire to the airframe ground creates a high resistance which, in...

Unless you own a very expensive meter with special high voltage leads, very bad things will happen. Web

The red lead goes to each of the connections described, i.e. power wire or ground wire, at the power supply. And leave the strobe tube connected....