wireweinie

Troopers did the investigation. Web

I'm cautiously optimistic but the timing stinks to high heaven. A few days ago the 'troopers' hauled a woman out of her home and off to involuntary...

Huh. That's not at all what I always imagine the 'F' to stand for. Web

If the install was a minor then why would the item require an STC? If you add or change an item and that function does not fall under the description...

In a nutshell, anything installed under an STC is going to be recorded on a 337. Web

You don't really do a 337 for an intercom do you? Web

Try this. Web

I've dealt with both. The Taliban's rules/enforcement are much more consistent. Web

Ya got THAT right! lol Web

If the feds are claiming that the ILS approaches were done incorrectly, it seems that that portion of the check ride should be done over (if claims...

All modern radios 'time out' with a stuck mic. That means that if the PTT sticks in the transmit mode, it will stay that way for a fixed amount of...

Best unit for the money right now (certified). Web

I scrounged up the hardware and now the OAT is up around 30ºF. I'll have to wait for it to cool off or find someones commercial freezer. Web

Or you can buy them from me. Web

Standard stick ball. Switches are from mouser.com. Drill the ball on an mandrel in a lathe. Glue the switch in place with RTV (so it can be removed...

Use a different push button switch. This pic shows the switch I use, buried in the stick ball. Very low profile target for boots. Web

Here are a couple of pics of a pilot stick I did recently. One pic shows the molex style connector on the PTT wire and the other shows the wire...

If it's in the parts book, it's legal to bolt on. No parts in the parts manual are 'unapproved' as they (and the manual) are approved by both the...

Just pointing out that the lag on startup produces the same effect as the lag produced by the impulse coupling. As to all the other features, the...

Just use single conductor, shielded wire. Put a connector at the base of the removable part of the stick. Then drop the wire through the bottom of...