PDA

View Full Version : Seper Cub vs Cub - fuselage



MDECARLI
10-19-2019, 05:26 AM
Hi boys,
I am big fan of aircrafts, models from Czech Rep
I for example do master for resin kits models in 1/72
I like fly on old machines, and...
I flown on L4 a few years ago
and
I flown last week on L18C (ex USAF, anf Luftwafe)

I have one question about fuselage
I did sudy many many drawing, but I still not know correct diferent

- 1st have Cub and Super Cub the same breadth ? in not - what many cm is diferent in cocpit ?
- 2nd have fuselage the same side view ?

Drawing see - fuselages the same from instrument panel
®but
I think that Super Cub is "slightly bloated"

I would like truth from experts
Thanks Martin Decarli
Czech Republic

Steve Pierce
10-19-2019, 06:59 AM
J3, PA11 and the Super Cub PA18 are the same dimensions. The fit in the same fuselage jig with an adapter for the front spar fittings. The seat is oin a different location. I believe the instrument panel is in about the same place.

MDECARLI
10-19-2019, 07:14 AM
Thank Steve
Think You that really is the same width fuselage in cocpit place???
Thanks Martin

Steve Pierce
10-19-2019, 07:17 AM
Yes, I have all the drawings and the jig and have repaired quite a few J3, PA11 and PA18 fuselages. Width is identical.

WhiskeyMike
10-19-2019, 08:03 AM
I have bolted many PA-18 engine mounts directly on to J-3 fuselages to make Restricted category 135HP and 150 J-3's. Same width, minus some braces; and the bird cage differs. I've actually had people tell me the J-3 birdcage has some strength advantages, but of course you have the wing spars slightly blocking your view - and they can be safety hazard for your head. With the fad for sitting super high in the seats with big cushions that could be a problem, but I always preferred to be more centered in the fuselage and have a better grip on the stick. You tend to hold on tight when you're terrified. :Gwhoa:

MDECARLI
10-19-2019, 09:15 AM
45210452114521245213

MDECARLI
10-19-2019, 09:20 AM
Super Cub (L18C ex Luftwaffe) over Stutgart /Germany)
and replica L4H over Prague
Thank You for infou about fuselage !!!
I really believed that L18 is wider....

PS Yes, I know, bird cage is diferent...

Brandsman
10-19-2019, 11:54 PM
Interesting replies - I did not know that the J-3 and PA-18 used the same jig and I always assumed that the PA-18 fuselage was way stronger than a J-3. What dictates gross weight - the fuselage or the wings? I expect the undercarriage also has heavier tubing in the 18? Itís interesting to me because the J-3 gross cannot be increased over 1320 lbs while 18s come in 1500 and 1750 flavors and can be upped to 2000 plus...


Sent from my iPhone using SuperCub.Org

MDECARLI
10-20-2019, 03:53 AM
Yes Brandsman - many my friend thit to today that fuselage from 18 is bigger.....
PS All plastic kits in world also have fuselage wider

PS II I did master for J3 1/72 plastic kits and I did fusselage
slightly narrower :-(:-(:-(4521945220
45218

Steve Pierce
10-20-2019, 07:23 AM
The dimensions are the same. The PA18 has more tubing and heavier duty gear/strut attach fittings. The landing gear on a PA18 is the same part number as the higher groww weigh J3.