Steve's Aircraft (Brian)
FRIEND
White City, Oregon
Dad found these chunks of metal in the pan of a 0-320 when doing a prop strike inspection.... We have overhauled probably 50 or more Lycoming's over the years and for the life of us we can not figure out where these parts came from.....
They are aluminum. Figured out the two smaller pieces fit together and are the same length as the longer one. You can also see on the long piece where it is getting wear at the same location as the break of the two smaller pieces. They are about 1/2" long by 1/8" wide with a slight concave surface amongst the length.
What do you all think...??? Would be nice to be able to tear this engine down knowing what we are up against.....
Brian.
They are aluminum. Figured out the two smaller pieces fit together and are the same length as the longer one. You can also see on the long piece where it is getting wear at the same location as the break of the two smaller pieces. They are about 1/2" long by 1/8" wide with a slight concave surface amongst the length.
What do you all think...??? Would be nice to be able to tear this engine down knowing what we are up against.....
Brian.