I just stumbled over the site here in the process of starting a new Cub project and wanted to say Hi to you all. I'm sure I'll be asking a bunch of questions here over the next few years, so I ask your patience.
My plans are to build a widebody with an L-21 greenhouse. I'll use a tack welded frame and finish the welding with Oxy/Acetelene.
I haven't decided on who's wings to use yet, but it will have rounded tips.
For power, probably a new Mattituck TMX O-320.
A glider tow hook (I'm a glider pilot) will probably finish the options.
Pull up a chair, the coffee pot is on and I'm always open to chat and suggestions.
Tom Tyson
Studley, VA
My plans are to build a widebody with an L-21 greenhouse. I'll use a tack welded frame and finish the welding with Oxy/Acetelene.
I haven't decided on who's wings to use yet, but it will have rounded tips.
For power, probably a new Mattituck TMX O-320.
A glider tow hook (I'm a glider pilot) will probably finish the options.
Pull up a chair, the coffee pot is on and I'm always open to chat and suggestions.
Tom Tyson
Studley, VA