I have an 0-320 A-2-A in my PA-12. I just installed the Lycoming spin on oil filter kit. I don't have the part number handy but I think there is only one spin on oil filter kit for the lycomings. The problem is with the heat probe off the original Piper oil temp/pressure gauge. The reach on the oil temp probe is not long enough to reach the seat on the filter housing. I need an adapter that will screw into the housing that will accomodate the temp probe--(that is one with shorter distance to the seat). Does anyone know where I can buy one? Any help will be appreciated.
Bob Carroll
Email: pa12 @worldnet.att.net
Phone: 509-292-8241
Bob Carroll
Email: pa12 @worldnet.att.net
Phone: 509-292-8241