Activity Stream

I’m interested in your prop

A quarter turn at a time Glenn Pete's better then me, I have to sneak up on it slowly

Oli, I am sticking with Catto(s) diameter is king for my mission.

Please tell us what direction you've went ?

If this just started happening in the cold weather, richen the idle mixture a turn.

My C-85 has a real flat spot between 1200-1500. If you don't run carb heat when cold on the ground (25-55'F) it likes to quit if you jab the throttle...

Just came across this ad if it helps. https://minneapolis.craigslist.org/dak/avo/d/saint-paul-bose-headset/7264664544.html

He probably means brake disc spacers. Lots of people think you need them so the brakes don't rub the 26 GY's.

After seeing those strakes on a couple 4 place cubs recently I asked Kirk Ellis about them. Apparently he is just now trying them and says they make...

I have a set of 26” GoodYear blimp tires and tubes in good condition. Located in Anchorage Alaska. Personal Message me about them, I am more likely...

My PA11 had an early MicroVG’s kit on the wings. it worked. As I recall, Penny Nixon was a Husky Driver maybe? :pop::pop:

Randy, The exhaust ingression to the cockpit generally comes in through the openings at the tail, then migrates forward. The cockpit due to the...

They do make a lapping compound for soft metal. I have not tried it so advice is worth what you paid for it. ...

Some of the stuff I linked is from Neal.

Should work now.

Here's a link to the Flybaby webpage. There's links to some Stromberg articles by Neal Wright. Also a link to Harry Fenton's site, all about 4...

steve can you do that a different way, says i need a google account to see it.

Competition for Dusty. I hope things work out for you, for a series of those books.

A few years ago, I noticed a kind of ticking sound in my 180. Eventually I looked up into the (dual) exhausts-- one muffler had been missing the...

Here is a file of Stromberg carburetor data that I have gathered over the years. I built a few out of a box of parts and had good service. There is...

the only 2 things to struggle with in those carbs is safety tying the main discharge nozzle and arm, ive got 5 thumbs on each hand and setting the...

I have both a steel needle/sharp edged seat and a delrin needle/rounded seat to try. Will try putting a vacuum to the inlet side and see which one...

Perfect. Thank you. Sent from my iPad using Tapatalk

Oil cooler still avail?

Thanks but just bought one and had installed yesterday. Gained 9mph after three adjustments. And sooooo smooth!