Activity Stream

Thanks for trying. Glad to see someone else had an argument with Windows 10 today. I lost too. Take care. MTV

Univair often has it in stock as well for better shipping rates.

Thanks Steve and others. You all have gotten me headed in the right direction. Checked the logs and the gear was obtained from Atlee. 563 seems...

He was one of our flight training instructors in Naknek, when he was Commander of the King Salmon air force base back in?? late 80's or early 90's......

I think Atlee originally just resold Jensen gear under his brand...... Sent from my iPhone using SuperCub.Org mobile app[/QU Jensen...

This is the best I can do with windows 10. MTV, You were a lot braver than I in trying to spell Bob's name. I am the last person they would be...

Dave, do you still have the 26" Goodyear blimp tires and tubes? Do you have the spacers as well? Any pics?

Buddy bought a Mavic Mini at Wally World. I am completely astonished at how well it works and the quality of the video. It can't be any bigger than...

In my spraying days I used auto fuel with 3 gal MMO in my 1000 gal tank running 235hp O-540's.........never an issue in 3000 hrs.....but auto fuel...

I think Atlee originally just resold Jensen gear under his brand...... Sent from my iPhone using SuperCub.Org mobile app

Sold

LOL. You are right, of course. It's just that I've never actually seen an unmodified PA 12, so I already don't know what to look for.

, Im not questioning the efficacy of the VGs under the tail. I’d suggest you visit with Penney Nixon, who did some pretty extensive flight test...

4 oz per 10 gallons is what the instructions call for. I added a quart to every 100 gallons in my bulk tank for years. I stopped a few years ago. No...

The end which attaches to the wing would need a major alteration in order to line up with the wing fitting. This since the front strut angles back to...

Some people used to put front struts on the rear to prevent the struts from folding when the aircraft was tied down tail into the wind in strong wind...

The lift produced by the tail is in a downward direction. The vortex generators on the bottom allow the tail to continue generating lift in a...

A shot glass full in 5 gallons seems to work ok Gary

I have changed between the Dodge standard length HD and the 3” HD using the same cabane V but different shock stunts for each. As I recollect I was...

For those of you using MMO, how much are you adding per gallon of fuel?

Even gear made by the same manufacture can be different. Bought a new set from Atlee years ago, went to install the outside axle for skis which...

Interesting discussion. An engine theory I have developed after racing sleds and watching folks hot rod lots of stuff: Your engine has a fixed...

Not that I recall. The lawnmower story was a good one although it needed more mowers

Hi MTV. I just can't let your comment go unanswered. The BLR kit was developed primarily to attempt to cure the moose stall, which was the rage of...

Mike, Thanks. I wonder if my Cub could benefit by the addition of VGs under the trailing edge of the horizontal stabilizer as well as the...

That looks to be a highly modified 12. Cub gear/tail, flaps, left side door, bushwheel/garr arrow tailwheel, suspect bigger engine. DENNY

On my first cup of coffee but real cheap and quick HP can be had by using a prop that will let it turn 2700 on static run up:wink: Just keep an eye...

Do you have the fitting brackets for them too? Are you based in the US? I'm based in England and I'm guessing the shipping $ for the pants would be...

I'm in the process of getting a new to me used WW 75" 3 blader dialed in for my Rotax Rans S-7S combo. A smaller dia then my usual 78" Prince 2...

But I seem to remember you having a stuck valve on your Pa11? Glenn