Activity Stream

Exp J3, RR90 with somewhere around 110 hp. Currently on Federal 1500AWB hydraulic skis. I’m comfortable upside down in a Cub but I have never spun a...

I'm looking at a nice 180. Checks all the boxes really. Low time airframe. Complete logs. No damage history. Well maintained- logs are actually...

If you had two PA-11's and all things being equal, other than one had a C-85 and the other had the C-90, would there be a noticeable difference in...

https://www.faa.gov/documentlibrary/media/advisory_circular/ac_90-66b.pdf "9.9.1 A short approach is executed when the pilot makes an abbreviated...

I know this isn't a Super Cub but I think there are a lot of AgCat pilots as well as banner pilots on here so hopefully you'll find it interesting....

Tac Aero is a flight school located in Hood River OR, they do a lot of tailwheel / back country training using Top Cubs & Carbon Cubs. I believe...

I'm interested to hear from experienced 185 drivers their response to this video. You only have to watch the first segment: ...

I'm curious if anyone here has purchased or intends to purchase any CubCrafter stock. I checked out their website, looks like it's $5 a share and...

I want to get an engine cover for my PA-18. Primary reason is more efficient pre-heating. I am in central Oregon so we are not dealing with extreme...

The cub is done and now onto something new. I recently acquired a 1953 180, 1,200 tt, 20 hours on a new engine. No float kit. I’m strongly...

Engine sounds really good, sure to wake the neighbors backing up in the morning. Seems to stay on the water a long time.

Snowed in and musing about flight: Glide ratio for wide body Cub at 2,000 lbs w/big tires and tailwheel, 360 engine and climb prop, slatted wings,...

Any members have a chance to use the 360 camera mount from the group buy?? I've been playing with mine a bit, the cold weather and low light makes it...

Howdy all. I've been a lurker and consumer of your collective wisdom on the forum for a while, but I'm coming down the home stretch now and am...

Does anyone have an image of the landing gear (either side) for a PA-18? Photo of the J5 version with dimensions attached as example of what I am...

I'm in the process of rebuilding my PA11 wings. I have them partially assembled and am at the point of trammelling them. When done with this process...

The Great Barrington Massachusetts airport is under siege by some people who don't like airplanes and aren't even neighbors. ...

Here’s another wintertime activity I enjoy. https://youtu.be/62tYzsFcDLI The two young men that were filming this with their homebuilt...

The New Winifred School has a hydroponics lab now, growing a variety of vegetables for Winifred. Next summer, attend the Upper Missouri Breaks Fly...

Any upgrade solution to lower door hinge on Supercub. Owner is larger guy and I've replaced the rear hinge several times but when entering or exiting...

I'm normally quite happy to fly my G3X Touch system with expired charts and databases as I maintain current charts and databases on portable devices....

I spoke to Dianna Duncan an hour ago and Bill had a complication from a procedure a few days ago and needed some medical attention, subsequently...

My D1 software update did not work and now I get a black screen, wont boot, worked perfect until the update failed. If someone has a D1 could you...

Any idea who makes these ribs? I need a new one or at least obtain some of the extruded “T” material for repair. Thanks Steve

Would someone have a drawing for PA-12 firewall? We need to fabricate one for our Exp -12 build. Thanks! Edit: I know this has come up...

After many years of hunting Moose and Caribou I’ve decided to give Dall Sheep a shot. What’s everyone’s favorite areas of Alaska to hunt them? Also...