Activity Stream

Scooter has an approval for the LR-14 regulator on a -12. That plane uses a boss mounted 40a alternator, though. I can attest to the 410H being...

Thanks to all who’ve contributed to this thread- this is one of my favorites in a while. I’m about sick and tired of some guy 3500 miles away behind...

So there's a bit to unpack here. I've used a alot of aerothane, It shoots well and is flexible as well as durable....(I don't mind repairs either)....

It sounds like the similar performance increase you get when you replace a muffler having collapsing baffles. Unless yours is gutted it may have...

That was 18 years ago. I wonder what is is now? :)

Ti firewall, carbon tank lid. No accessories and a plastic prop will help as much as anything I bet

I thought he meant 60 “over 80”, like 60/80

Post deleted.

Sounds like it's breathing better for some reason. Maybe something to do with the carb heat mechanism???? FWIW, I get about 2600 at 70 mph...

Was the engine rise at idle mixture cutoff the same as usual? Gary

shock absorbers combined with the landing gear bungees, i have them and have never landed a cub without them, but with the big low pressure tires and...

Lots of ways to skin a cat. Looks pretty cool to me. Clever idea, I like it. Bill

A mechanic buddy of mine got wrapped up in that with a new customer. Finally told the guy he wasn't dealing with Savy, he could find another...

I have a set of skis just like this if you’re looking for a set. Sent from my iPhone using Tapatalk

As an owner I've wondered why an 80 PSI reading was as good as something that's 10X that, like real running BMEP. High pressure can help seal rings...

If you hadn't cashed the settlement check and relenqueshed the aircraft that was a false statement by the insurance representative. This is one of...

I don't know if these are what you want but this is the single pulley arrangement. I just modified the wip pulley and cut the retract tube off and...

Maybe I was just unlucky then. No problems after the overhaul by Winter.

Almost exclusively the 2 1/4" instruments. They are my go to items for shrinking an instrument panel. Web

2.25 or 3.125? I got the impression the larger instruments were far more robust. I had to use 2.25 because of very small panel area.

the little continentals are good motors. good oil pump housing with crank and rod bearings, cam main bearings and lifter bores in spec and they will...

Good to know!

Thanks for the rear seat advice! Roughest thing I plan on is smooth Eastern USA River bars so Probly don’t need a big tailwheel. what are...

I've not seen any mention of where the compression is leaking on these "failing" cylinders. When I run a compression test, I am more concerned about...

The compression is giving you a quick idea of the cyl. And then you can figure out what is leaking and why. Sent from my iPhone using Tapatalk

Weird when all mechanics share the same opinion of him. Sent from my iPhone using Tapatalk

For what it is worth I was just throwing the Busch article out there as food for thought. I am one of those folks that always read, and heard,...