Activity Stream

Don't know if this info will help, built a CC EX-2 with full Dynon. My magnetometer in the L wing (aft of the fuel tank away from wires and cables)...

Never thought of either of these that way. This kind of puts things into perspective.

You need to treat it like a compass installation if it has the magnetometer built in. If a compass doesn't work well inside a steel tube fuselage...

In my experience, a bead breaker works soo much better than walking /jumping on the bead, etc. The big problem might be finding one that's big...

Penis envy.

George did a great job! If you did not see it live, take the time to watch the youtube! https://youtu.be/mESJKHlfs4I sj

We are doing about one a month and have been for about two years. We are not finding much wrong as far as the SB/AD is concerned but do find a LOT of...

Too hot! Especially for the winter. Must be global warming.

The more things change, the more they stay the same.......

The tail was off my 182A 3 years ago and was reinstalled with new jackscrews, bushing etc. It is nice and tight. I inspected it when I bought it...

87 in South Florida!

Neighbor bought a 185 last year not too far from its last annual. This year did the tail inspection and found cracks that had been painted over....

ha. Truth. I like this.

I did a set of Super STOL wings this summer and with the help of Monika it was a breeze!! Im getting ready to strip my Maule and do it next... ...

Eh Mark there was a almost record 942mb Low west of you near Shemya now moving NE and onshore. Stormy but yes...good time to paint and deal with...

THat is a nice "Add a leaf" stack of springs thick\thin\thick.... ABI Did have a 3 leaf that was arched correctly I don't know if they still do.

Warm enough to paint during a blizzard... Sent from my iPad using Tapatalk Pro

Set the tire/wheel combo flat with no air, squirt soap water combo around bead area then walk around the tire rim area a little bit and let it soak...

I don’t know where you are, but if you’re in REALLY cold country, understand that when the local village is reporting -40, thr temperature on that...

Great job George. I really enjoyed it! Bill

Not to drift off of this thread too far but...In the past, I’ve had a heck of a time getting the 10” rims off 35s. Jumping, prying, etc. This time, I...

If you can afford it, then just buy what you want. Enjoy it. It’s a super cub, not an X-15. Every aircraft type forum clings to the belief that you...

Unusual weather in Southern AZ. Yesterday there was an inch of snow in my back yard in Sierra Vista AZ when I got up all melted by 3pm. A solid 60...

Thanks for the advice! Much appreciated! Sent from my iPhone using SuperCub.Org

Where's our progress update???? :smile:

I've drizzled this WX link before....he posts every monday in winter. Follow it for long range outlooks and some why's. Follow the T2M figures for...