Activity Stream

Some of the stuff I linked is from Neal.

Should work now.

Here's a link to the Flybaby webpage. There's links to some Stromberg articles by Neal Wright. Also a link to Harry Fenton's site, all about 4...

steve can you do that a different way, says i need a google account to see it.

Competition for Dusty. I hope things work out for you, for a series of those books.

A few years ago, I noticed a kind of ticking sound in my 180. Eventually I looked up into the (dual) exhausts-- one muffler had been missing the...

Here is a file of Stromberg carburetor data that I have gathered over the years. I built a few out of a box of parts and had good service. There is...

the only 2 things to struggle with in those carbs is safety tying the main discharge nozzle and arm, ive got 5 thumbs on each hand and setting the...

I have both a steel needle/sharp edged seat and a delrin needle/rounded seat to try. Will try putting a vacuum to the inlet side and see which one...

Perfect. Thank you. Sent from my iPad using Tapatalk

Oil cooler still avail?

Thanks but just bought one and had installed yesterday. Gained 9mph after three adjustments. And sooooo smooth!

By the way, the Sutton's are a real joy to work with. It is a great family operation, and they have always been very receptive to my calls and...

I have a WW ground adjustable, 82" for o360, that is for sale, great prop, just went in a different direction. PM me if you are interested.

Note in parts on this website. I have a set of 2100A's for sale. They will be removed in February. Inside stored in northern WI.

Glenn, thank YOU for your advice on rigging the skis. I appreciate your expertise very much! Randy

I don't think so, but didn't take a chance....I rebuilt all the cables! Learned about swaging stainless steel cables...despite what Aircraft Spruce...

pierce, i actually have a steel needle/seat that dosent leak, yet, im even amazed. so it can be done.

Bob is not accepting carburetors because of Covid so that takes him out of the picture anyway. We have one on a J3 that Bob did his magic on. It...

Regardless of how you mount them....flying floats is about the most fun you can have in an airplane!

Ha, 15+ years ago I called Fresno Airmotive who had a guy who was a Bergh guru. I told him my stumbing problem and said I should mention that my carb...

Drip. Drip. Drip. Is there anyone on here that does not have a Champ or a Cub in a back hangar on their airport with gas stains down the cowling and...

The clamp on float fittings are part of the set of floats when they come from the manufacturer. They are also dependent on which make and model...

Hello All, Does anyone have photos of the wing modifications for the GW increase that was completed with wing fabric on? I have reviewed the mod...

I have participated in model aviation from the age of 4 years old. I own a Mavic Mini, a wonderful piece of technology that I put to use filming...

Thank you for sharing Randy :up Anthony

I can imagine it throws that heat pretty far. In powdery snow our right lower gear leg around brake caliper always gets caked up like a block of rime...