RVBottomly
PATRON
Asotin County Washington (KLWS)
I found this on the Rans website regarding teleflex for flaps.
It comes from the discussion of the S-21 Outbound. Scroll down to 3/29/17 entry:
https://www.rans.com/21-outbound-progress-page-2
I notice that flap deployment is in a pull configuration on a bellcrank. I remember the telexflex "Xtreme" cables can handle an 8" bend radius.
It comes from the discussion of the S-21 Outbound. Scroll down to 3/29/17 entry:
https://www.rans.com/21-outbound-progress-page-2
I notice that flap deployment is in a pull configuration on a bellcrank. I remember the telexflex "Xtreme" cables can handle an 8" bend radius.