Likes Likes:  0
Results 1 to 3 of 3

Thread: Yamaha Evaluates Slotted Flaps In MotoGP Testing

  1. #1
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    18,104
    Post Thanks / Like

    Yamaha Evaluates Slotted Flaps In MotoGP Testing

    Very interesting use of split flaps and a good history on their use and the theory behind them.
    https://www.cycleworld.com/yamaha-ev...motogp-testing
    Last edited by Steve Pierce; 02-17-2019 at 09:00 AM.
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers

  2. #2
    fobjob's Avatar
    Join Date
    Aug 2002
    Location
    Salt Lake City, Utah
    Posts
    2,027
    Post Thanks / Like
    In theory, the leak of high pressure air in front of the double slotted flap should encourage air molecules to not change direction 90 degrees and exit out the wingtip (40 mph, normally, with factory flaps) and exit out under the trailing edge of the flap....this could be quantitized by measuring the “drop” airspeed before and after the slotted flap addition...
    Has anyone experimented with fences on the underside outboard end of flaps to prevent excess air spillage?


    In theory, theory and practice are the same. In practice, they aren’t....

  3. #3
    BC12D-4-85's Avatar
    Join Date
    Feb 2016
    Location
    Fairbanks, AK.
    Posts
    1,249
    Post Thanks / Like
    Quote Originally Posted by fobjob View Post
    Has anyone experimented with fences on the underside outboard end of flaps to prevent excess air spillage?
    Yes both outboard and inboard 7GCBC and PA-18A. Helps. Tried end plates with top and bottom extensions like plates on duster wing ends and single bottom. If installed on one flap the planes rolled away from the modified flap when extended=more lift. Made of lexan they were invisible.

    Edit: On one application (the Cub) I used rivet nuts and screws to hold the plates and the second plain temporary velcro. Now there's Dual-lock tapes which hold even better: https://www.3m.com/3M/en_US/company-...94857497&rt=r3

    The Citabria already had Crosswinds STOL kit with the inboard flap gap sealed with a metal plate so the outboard end was fenced as an experiment.

    Gary
    Last edited by BC12D-4-85; 02-18-2019 at 05:21 PM.
    Thanks fobjob thanked for this post

Similar Threads

  1. 1989 Yamaha outboard
    By Tanner in forum Everything Else (formerly:My Other Plane Is A....)
    Replies: 11
    Last Post: 07-01-2014, 07:47 PM
  2. Alaska Bush Wheel Slotted Flaps
    By Clifford in forum Cafe Supercub
    Replies: 1
    Last Post: 09-04-2013, 02:38 AM
  3. GURNEY FLAPS, WICKERBILLS .....testing data and photos
    By Dave Calkins in forum Experimental Cubs
    Replies: 30
    Last Post: 06-15-2009, 09:32 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •