Anyone got the template for Micro VG's on an extended wing

[shortfielder]

I just bought a Wagaero 2+2 with extended wings. Just talked with Micro and it sounds like I can buy a kit for $600 with an exact template for exact VG placement or one for $400 with a rough idea of where to place them. I was hoping maybe someone here had the exact template I could borrow to put the VG's on and save the $200 for more important things like gas(to learn how to fly my new plane) and beer(to have the courage).
Any tips on placement would also be greatly appreciated.
I would like to do it just once and be done with that.
Thanks Gary

[Cub Builder]

This may not be the answer you're looking for as you are apparently sold on the Micro VG brand, but I installed the StolSpeed VGs on my extended wing WagAero SC. $100 from Aircraft Spruce includes a short template and instructions. It took roughly 2 hours to install on both wings. I haven't flown any other brand of VGs for comparison, but was pleased with the added slow speed stability of the wing with these installed. The instructions recommended installing the VGs in a straight line. I chose to move them farther forward in front of the ailerons.

-CubBuilder

Attachment 7622

[jgerard]

the micro kit is well worth the $$ and makes it sooooo easy to install. For extended wings just peel off the root template after you glue those on and put it at the tip to keep going with the same spacing.

Jason

[DW]

What Jason said, I have had both micro's and BLRs both work well but with the micro's you have no strack. I prefer the micro's