I just got a set of Atlee Dodge weld on float fittings. They don't fit tight up to the lower longeron. I tried them on my PA-18 and my PA-11 they fit the same there is a 1/4 inch gap from the front through the back of the fitting. Not even close to the longeron. I tried it on all the clusters all the way back same thing. Since the 18 and the 11 are the same I'm thinking the fittings are wrong. Has any one seen this before what can I do? I'm going to call Atlee Dodge later this morning.
Sent from my iPhone using Tapatalk