Grant
FRIEND
At Work.....
So my airplane has 6" clevelands ( 40-28 ). One of the wheel halfs is bad. I have another complete set of 6" Cleveland wheels (40-97D). The problem is that the 40-97D wheels would need a 1/4" spacer on each side of the wheel for it to be positioned properly on the axle and make up for the fact that the bearing position on these wheels is 1/2" narrower (1/4" each side of centerline of wheel).
The question is would this be a minor alteration to use these wheels and add spacers?
Thanks!
The question is would this be a minor alteration to use these wheels and add spacers?
Thanks!